Physio Magneto PM-ST Pulsed Electromagnetic Field Therapy Machine for Pain Relief and Rehabilitation

Professional High-Intensity Pulsed Magnetic Therapy System

Dual-Mode Electromagnetic Technology for Physiotherapy and Rehabilitation

The Physio Magneto PM-ST is a professional pulsed electromagnetic therapy system developed for physiotherapy, rehabilitation and appropriately supervised musculoskeletal applications.

With a manufacturer-stated peak magnetic-field strength of 4 Tesla at the applicator coil, two operating modes and a flexible positioning arm, the system supports hands-free treatment workflows in professional clinical environments.

A 10.4-inch touchscreen, integrated water-cooling system and universal voltage compatibility provide convenient operation for qualified physiotherapists and healthcare professionals.

Four-Tesla peak field | Two treatment modes | Hands-free operation | Three-year warranty

Two Professional Magnetic-Therapy Modes

ST Mode — High-Frequency Pulsed Operation

ST Mode provides high-frequency pulsed electromagnetic stimulation with an oscillation frequency of up to 130 kHz according to the supplied specification.

This mode can be incorporated into professionally supervised programs focused on:

• 
  Selected musculoskeletal conditions
  
• 
  Muscle-stimulation protocols
  
• 
  Rehabilitation support
  
• 
  Selected joint and soft-tissue applications
  
• 
  Other uses authorized for the device
  

MT Mode — 50 Hz Magnetic Operation

MT Mode delivers pulsed magnetic stimulation at 50 Hz.

It provides an alternative operating format for protocols involving:

• 
  Neuromuscular stimulation
  
• 
  Muscle relaxation
  
• 
  Selected pain-management programs
  
• 
  Rehabilitation support
  
• 
  Other professionally assessed applications
  

The appropriate mode and parameters must be selected according to the client’s diagnosis, treatment area, contraindications and professional protocol.

Understanding the Four-Tesla Specification

The supplied technical information lists:

• 
  Peak magnetic-field strength at the coil: 4 T
  
• 
  Magnetic-field strength at 4 cm: 0.4 T
  
• 
  Manufacturer-stated maximum reach: up to 18 cm
  
• 
  Magnetic-field change rate: 92 T/s
  

The 4 T figure refers to peak output at the applicator coil. Magnetic-field strength decreases with distance from the coil, as reflected by the stated 0.4 T measurement at 4 cm.

Treatment effect depends on:

• 
  Distance from the applicator
  
• 
  Applicator positioning
  
• 
  Pulse waveform
  
• 
  Frequency
  
• 
  Exposure duration
  
• 
  Tissue anatomy
  
• 
  Individual response
  

Non-Contact, Hands-Free Operation

The flexible positioning arm holds the treatment applicator over the selected area during operation.

This provides several workflow advantages:

• 
  Consistent applicator placement
  
• 
  Reduced need for continuous handpiece movement
  
• 
  Convenient positioning around larger joints and muscle groups
  
• 
  Minimal preparation compared with contact-based modalities
  
• 
  No conductive gel required
  
• 
  Treatment through suitable non-metallic clothing
  
• 
  Easier integration into professional rehabilitation workflows
  

Hands-free operation does not mean the patient can be left completely unattended. The practitioner should monitor positioning, comfort and system performance throughout treatment.

Potential Professional Applications

Subject to the device’s authorized indications, professional diagnosis and applicable local regulations, pulsed magnetic therapy may be incorporated into rehabilitation programs concerning:

• 
  Selected knee, hip, shoulder or elbow concerns
  
• 
  Muscular tension or spasm
  
• 
  Selected osteoarthritis-related symptoms
  
• 
  Rehabilitation following suitable sports injuries
  
• 
  Selected chronic musculoskeletal pain
  
• 
  Range-of-motion programs
  
• 
  Neuromuscular stimulation
  
• 
  Post-treatment rehabilitation under professional supervision
  
• 
  Other applications authorized for the system
  

Clinical evidence varies between conditions, devices and protocols. The PM-ST should not be promoted as treating virtually every pain, spinal, tendon, bone or inflammatory condition.

Claims That Should Not Be Guaranteed

The Physio Magneto PM-ST should not be advertised as guaranteeing:

• 
  Cellular re-energization
  
• 
  Restoration of cell-membrane potential
  
• 
  Increased ATP production
  
• 
  Accelerated bone healing
  
• 
  Permanent pain relief
  
• 
  Elimination of inflammation
  
• 
  Reversal of degenerative disease
  
• 
  Restoration of damaged spinal tissue
  
• 
  Improved circulation in every patient
  
• 
  No adverse effects
  
• 
  Safety for all age groups or medical conditions
  

These outcomes require evidence for the exact device, parameters, condition and patient population.

How Pulsed Magnetic Stimulation Works

The applicator coil produces a time-varying magnetic field.

A changing magnetic field can induce electrical activity within nearby conductive tissue. Depending on the output, frequency and positioning, this may stimulate peripheral nerves and muscles.

The client may experience:

• 
  Muscle contractions
  
• 
  Twitching
  
• 
  Tapping or pulsing sensations
  
• 
  Tingling
  
• 
  Temporary muscle fatigue
  
• 
  Post-treatment soreness
  

The technology is non-contact and does not use needles or surgical incisions. However, “non-invasive” does not mean risk-free or suitable for every patient.

Build a Professional Rehabilitation Workflow

Joint-Area Protocols

Position the applicator over an appropriately assessed joint area using the flexible support arm.

Large Muscle-Group Stimulation

The high-intensity magnetic field can support professionally controlled stimulation of suitable muscle groups.

Neuromuscular Applications

MT Mode provides a lower-frequency option for selected neuromuscular protocols.

Rehabilitation Programs

The system may be incorporated into a broader rehabilitation plan that includes exercise, manual therapy and other evidence-based interventions.

Monitoring and Reassessment

Treatment progress should be evaluated using appropriate clinical outcome measures rather than relying only on subjective improvement claims.

How a Professional Session Works

1. Clinical Assessment

The practitioner reviews the patient’s diagnosis, symptoms, medical history, implanted devices and contraindications.

2. Treatment Planning

The practitioner selects ST Mode or MT Mode according to the clinical objective and device instructions.

3. Applicator Positioning

The patient is positioned comfortably and all metallic objects are removed from the treatment field. The applicator is secured using the adjustable arm.

4. Parameter Selection

Frequency, intensity, treatment time and other available settings are selected according to the professional protocol.

5. Controlled Treatment

Treatment begins while the practitioner monitors patient comfort, muscle response and applicator position.

6. Post-Treatment Assessment

The practitioner checks for discomfort, muscle fatigue, soreness or other responses and documents the session.

7. Follow-Up

Further sessions are scheduled only when appropriate based on the patient’s response and treatment plan.

A universal 10–20-minute protocol or fixed 8–12-session course should not be promised for every condition.

Technical Specifications

SpecificationDetailsProduct namePhysio Magneto PM-STProduct typeProfessional pulsed magnetic therapy systemTechnologyHigh-intensity pulsed electromagnetic stimulationOperating modesST Mode and MT ModePeak field strength at coilUp to 4 TField strength at 4 cmApproximately 0.4 TManufacturer-stated maximum reachUp to 18 cmMaximum oscillation frequencyUp to 130 kHzMT Mode frequency50 HzMagnetic-field change rate92 T/sTherapeutic-intensity referenceManufacturer-stated ≥10 mTDisplay10.4-inch touchscreenApplicator supportFlexible hands-free positioning armCooling systemIntegrated water coolingWater-cooling capacity2.5 LInput voltageAC 100–240 V, 50/60 HzPackage dimensions66 × 60 × 49 cmNet weightApproximately 40 kgWarrantyThree-year limited parts warrantyTechnical supportLifetime remote support

Specifications may be updated according to the final production configuration.

What Is Included?

Main Equipment

• 
  One Physio Magneto PM-ST control system
  
• 
  One magnetic-field treatment applicator
  
• 
  One flexible positioning arm
  
• 
  Integrated water-cooling system
  
• 
  Power cable suitable for the selected market
  
• 
  Required connection accessories
  

Documentation and Training

• 
  English user manual
  
• 
  Installation and setup guidance
  
• 
  ST Mode operating guidance
  
• 
  MT Mode operating guidance
  
• 
  Patient-screening guidance
  
• 
  Cleaning and maintenance instructions
  
• 
  Water-cooling maintenance guidance
  
• 
  Basic troubleshooting assistance
  
• 
  Training certificate after completion
  

Final package contents should be confirmed on the order quotation.

Professional Training and Support

Wikbeauty provides remote equipment training covering:

• 
  Machine installation
  
• 
  Touchscreen navigation
  
• 
  Applicator positioning
  
• 
  ST and MT Mode selection
  
• 
  Basic parameter adjustment
  
• 
  Patient screening
  
• 
  Removal of metallic objects
  
• 
  Treatment monitoring
  
• 
  Water-cooling maintenance
  
• 
  Cleaning and storage
  
• 
  Basic troubleshooting
  

A training certificate is provided after completion.

Equipment training does not replace professional physiotherapy education, medical diagnosis or any license required in the operator’s jurisdiction.

Three-Year Parts Warranty

The Physio Magneto PM-ST is supported by a three-year limited parts warranty and lifetime remote technical support.

Warranty Coverage

Subject to the official warranty terms, eligible manufacturing defects may be covered for:

• 
  Main machine unit
  
• 
  Internal electronic components
  
• 
  Touchscreen
  
• 
  Original treatment applicator
  
• 
  Flexible positioning arm
  
• 
  Water-cooling components
  
• 
  Original connectors
  
• 
  Other eligible machine parts
  

Consumable, wear and maintenance components may have separate coverage terms.

Technical-Support Process

If a technical issue occurs, Wikbeauty will assist with:

1. 
   Remote technical assessment
   
2. 
   Guided diagnostic testing
   
3. 
   Identification of the affected component
   
4. 
   Confirmation of warranty eligibility
   
5. 
   Replacement-part assistance where applicable
   
6. 
   Remote installation guidance
   

Warranty Exclusions

The warranty does not normally cover:

• 
  Accidental or cosmetic damage
  
• 
  Incorrect operation or misuse
  
• 
  Unauthorized repairs or modifications
  
• 
  Incorrect voltage or electrical connection
  
• 
  Improper water-cooling maintenance
  
• 
  Use of unsuitable cooling liquid
  
• 
  Damage caused by dropping the applicator
  
• 
  Normal wear of moving or support components
  
• 
  Unauthorized transportation damage
  
• 
  Failure to follow the operating manual
  

All coverage remains subject to Wikbeauty’s official warranty policy.

Contraindications and Safety Precautions

High-intensity pulsed magnetic fields can interact with implanted devices and metallic objects.

The system must not be used without appropriate professional assessment.

Treatment may be contraindicated or require specialist clearance in patients with:

• 
  Pacemakers
  
• 
  Implantable cardioverter-defibrillators
  
• 
  Neurostimulators
  
• 
  Medication pumps
  
• 
  Cochlear implants
  
• 
  Other active electronic implants
  
• 
  Ferromagnetic implants or metal in the treatment field
  
• 
  Pregnancy or suspected pregnancy
  
• 
  Active cancer in the treatment area
  
• 
  Recent bleeding or significant bleeding disorders
  
• 
  Uncontrolled seizure disorders
  
• 
  Severe cardiovascular conditions
  
• 
  Impaired sensation
  
• 
  Other contraindications listed in the user manual
  

Additional Operating Precautions

• 
  Remove phones, watches, keys, cards and other metallic or electronic objects from the treatment field.
  
• 
  Do not position the applicator over the head, eyes or other prohibited areas unless specifically authorized.
  
• 
  Confirm implant compatibility before treatment.
  
• 
  Monitor the patient for excessive contractions, discomfort, dizziness or other adverse responses.
  
• 
  Ensure the applicator is securely positioned before starting.
  
• 
  Maintain the water-cooling system according to the supplied instructions.
  

This is not an exhaustive contraindication list. Medical clearance should be obtained whenever treatment suitability is uncertain.

Intended Professional Users

The Physio Magneto PM-ST is suitable for:

• 
  Physiotherapy clinics
  
• 
  Rehabilitation centers
  
• 
  Sports-medicine practices
  
• 
  Orthopedic rehabilitation clinics
  
• 
  Pain-management practices
  
• 
  Qualified physical therapists
  
• 
  Appropriately trained healthcare professionals
  

The system is not intended for casual, consumer or unsupervised home use.

Why Choose Physio Magneto PM-ST?

High-Intensity Magnetic Output

The system provides a manufacturer-stated peak field strength of up to 4 T at the applicator coil.

Two Operating Modes

Choose between high-frequency ST Mode and 50 Hz MT Mode according to the professional protocol.

Hands-Free Positioning

The flexible arm supports stable applicator placement during supervised treatment.

Non-Contact Operation

Treatment can be delivered through suitable non-metallic clothing without conductive gel.

Integrated Water Cooling

The 2.5 L cooling system supports controlled equipment temperature during professional operation.

Universal Voltage

AC 100–240 V compatibility supports installation across multiple international markets.

Long-Term Equipment Support

Professional training, a three-year limited parts warranty and lifetime remote technical assistance are included.

Frequently Asked Questions

What is Physio Magneto PM-ST?

It is a professional high-intensity pulsed magnetic therapy system with two operating modes and a peak field strength of up to 4 T at the applicator coil.

Is PM-ST the same as conventional low-intensity PEMF?

No. PM-ST uses substantially higher peak magnetic output than many low-intensity consumer PEMF products. Research on one type of electromagnetic device cannot automatically validate another.

What is the difference between ST Mode and MT Mode?

ST Mode provides higher-frequency pulsed operation up to the machine’s specified maximum. MT Mode operates at 50 Hz for a different stimulation format.

Can patients remain clothed?

The magnetic field can pass through suitable non-metallic clothing. Metallic items, electronic devices and unsuitable garments must be removed from the treatment field.

Is treatment painless?

Patients may experience contractions, twitching, tingling or tapping sensations. Intensity should be adjusted according to professional judgment and patient tolerance.

Is there any downtime?

Many patients may continue normal activities after treatment, but temporary muscle fatigue, soreness or cramping may occur.

Is it safe for patients with pacemakers?

No. High-intensity pulsed magnetic fields may interfere with pacemakers and other active implants. These patients should not be treated unless expressly permitted by the device instructions and relevant medical specialists.

How many sessions are required?

There is no universal treatment course for every condition. Frequency and session number must be determined by a qualified professional.

What does the warranty cover?

The three-year limited warranty covers eligible manufacturing defects affecting approved machine parts. Accidental damage, misuse, improper cooling maintenance and unauthorized modifications are excluded.

Add High-Intensity Magnetic Therapy to Your Practice

The Physio Magneto PM-ST combines:

1. 
   Up to 4 T peak magnetic output
   
2. 
   ST and MT operating modes
   
3. 
   Hands-free applicator positioning
   
4. 
   A 10.4-inch touchscreen
   
5. 
   Integrated water cooling
   

Available for qualified professional use and subject to applicable local regulations.

Request Professional Pricing and Product Information

The Physio Magneto PM-ST is designed for professional rehabilitation environments that require high-intensity, non-contact magnetic stimulation with flexible treatment positioning.

Key features include:

• 
  High-intensity pulsed electromagnetic stimulation
  
• 
  ST Mode and MT Mode
  
• 
  Peak magnetic-field strength up to 4 T at the applicator coil
  
• 
  Approximately 0.4 T field strength at 4 cm
  
• 
  Manufacturer-stated maximum reach up to 18 cm
  
• 
  Maximum oscillation frequency up to 130 kHz
  
• 
  MT Mode frequency: 50 Hz
  
• 
  Magnetic-field change rate: 92 T/s
  
• 
  10.4-inch touchscreen
  
• 
  Flexible hands-free positioning arm
  
• 
  Integrated water cooling
  
• 
  2.5 L water-cooling capacity
  
• 
  AC 100–240 V, 50/60 Hz compatibility
  
• 
  Three-year limited parts warranty
  
• 
  Lifetime remote technical support

Wikbeauty provides remote equipment training covering:

• 
  Machine installation
  
• 
  Touchscreen navigation
  
• 
  Applicator positioning
  
• 
  ST and MT Mode selection
  
• 
  Basic parameter adjustment
  
• 
  Patient screening
  
• 
  Removal of metallic objects
  
• 
  Treatment monitoring
  
• 
  Water-cooling maintenance
  
• 
  Cleaning and storage
  
• 
  Basic troubleshooting

Product Name: Physio Magneto PM-ST

Product Type: Professional pulsed magnetic therapy system

Technology: High-intensity pulsed electromagnetic stimulation

Operating Modes: ST Mode and MT Mode

Peak Field Strength at Coil: Up to 4 T

Field Strength at 4 cm: Approximately 0.4 T

Manufacturer-Stated Maximum Reach: Up to 18 cm

Maximum Oscillation Frequency: Up to 130 kHz

MT Mode Frequency: 50 Hz

Magnetic-Field Change Rate: 92 T/s

Therapeutic-Intensity Reference: Manufacturer-stated ≥10 mT

Display: 10.4-inch touchscreen

Applicator Support: Flexible hands-free positioning arm

Cooling System: Integrated water cooling

Water-Cooling Capacity: 2.5 L

Input Voltage: AC 100–240 V, 50/60 Hz

Package Dimensions: 66 × 60 × 49 cm

Net Weight: Approximately 40 kg

Warranty: Three-year limited parts warranty

Technical Support: Lifetime remote support

The provided product information confirms:

• 
  Input Voltage: AC 100–240 V, 50/60 Hz
  
• 
  Net Weight: Approximately 40 kg
  
• 
  Package Dimensions: 66 × 60 × 49 cm
  
• 
  Power Cable: Suitable for the selected market
  
• 
  Flexible Positioning Arm: Included
  
• 
  Required Connection Accessories: Included
  
• 
  Integrated Water-Cooling System: Included

Need multiple units for your physiotherapy clinic, rehabilitation center, sports-medicine practice, pain-management practice, or distribution business?

Wikbeauty offers volume purchasing options for larger orders.

You can visit our dedicated Volume Discount page or contact us directly for current bulk-order pricing and purchasing support.