Macchina HIFU

Professional Portable 7D HIFU System

Dual-Handle Technology for Facial Lifting and Body Contouring

The Wikbeauty Portable 7D HIFU Machine is a professional dual-handle system designed for non-surgical facial treatments, skin firming and body-contouring applications.

A dedicated Face Handle and Body Handle provide seven cartridge depths ranging from 1.5 mm to 13 mm. This allows trained operators to select an appropriate treatment depth for the face, neck or larger body areas.

Its 15-inch touchscreen, universal voltage and portable desktop design make the system suitable for beauty salons, med spas, aesthetic clinics and qualified independent practitioners.

Two dedicated handles | Seven cartridge depths | 15-inch touchscreen | Three-year warranty

One Portable System for Face and Body Treatments

Face Handle

The Face Handle is supplied with four treatment depths for professional facial and neck applications:

• 1.5 mm

• 2.0 mm

• 3.0 mm

• 4.5 mm

The available cartridges allow trained operators to develop treatment protocols for different facial areas and tissue depths.

Common applications include:

• Facial skin firming

• Jawline definition

• Neck treatments

• Brow-area lifting

• Improvement in the appearance of fine lines

• Facial contour refinement

Body Handle

The Body Handle uses deeper cartridges for professional body-contouring and skin-firming applications:

• 6.0 mm

• 9.0 mm

• 13.0 mm

These depths are intended for larger treatment areas such as:

• Abdomen

• Waist and flanks

• Upper and lower back

• Upper arms

• Thighs

• Hips

• Buttocks

Cartridge selection and energy parameters must be determined by a trained operator after completing a client consultation.

Dedicated 5.5 MHz Eye-Area Cartridge

The 2.0 mm cartridge operates at 5.5 MHz and is designed for precise treatments around appropriate areas near the eyes.

It may be incorporated into professional protocols focused on:

• Appearance of crow’s feet

• Fine lines around the eye area

• Localized skin firming

• Delicate facial areas requiring precise energy placement

Treatments near the eyes require advanced knowledge of facial anatomy, correct cartridge positioning and strict adherence to the manufacturer’s safety instructions.

The cartridge must never be applied directly over the eye, eyelid or any area prohibited by the operating manual.

Seven Treatment Depths for Greater Flexibility

The table provides general positioning information only. Treatment depth must be selected according to the client’s anatomy, tissue thickness, treatment area and professional protocol.

How 7D HIFU Technology Works

The system delivers focused ultrasound energy at a selected treatment depth without creating a surgical incision.

When applied correctly, controlled energy is directed below the skin’s surface to support the body’s natural tissue-remodeling response. Professional HIFU treatments are commonly incorporated into aesthetic programs focused on skin firming, lifting and contour refinement.

The dual-handle design separates facial and body applications, helping operators select the correct handpiece and cartridge for each treatment area.

Individual responses and outcomes vary. Results depend on factors such as age, skin condition, tissue thickness, treatment settings and the protocol used.

Professional Treatment Applications

Treatment suitability should be confirmed through a complete consultation and contraindication assessment.

Build a Complete Face and Body Service Menu

Facial HIFU Treatments

Use the 1.5 mm, 3.0 mm and 4.5 mm cartridges to develop professional facial treatment protocols at different depths.

Precision Eye-Area Treatments

The specialized 2.0 mm, 5.5 MHz cartridge provides an additional service option for suitable areas around the eyes.

Jawline and Neck Contouring

Selectable facial cartridge depths support structured treatments for the lower face, jawline and neck.

Body-Contouring Treatments

The 6.0 mm, 9.0 mm and 13.0 mm body cartridges allow operators to work with different body areas and tissue depths.

Combination Treatment Plans

Qualified professionals may incorporate face and body services into structured treatment plans. Each area must be assessed and treated according to its individual requirements.

Portable Design for Flexible Treatment Spaces

At approximately 17 kg net weight, the system provides the functionality of a dual-handle face and body platform in a portable desktop format.

This makes it suitable for:

• Clinics with limited treatment-room space

• Beauty salons offering multiple services

• Practitioners working across different rooms

• Med spas seeking a compact HIFU system

• Qualified mobile practitioners with appropriate transport procedures

Portable does not mean handheld or suitable for casual transportation. The machine should be moved, packed and installed according to the manufacturer’s instructions.

Professional Operating Controls

The machine provides a large touchscreen interface and adjustable treatment parameters for controlled professional operation.

Key operating features include:

• 15-inch color touchscreen

• Dedicated Face and Body Handles

• Continuous and single-shot modes

• Adjustable energy output

• Adjustable dot spacing

• Seven treatment depths

• Cartridge capacity of 10,000–20,000 shots

• Universal AC 100–240 V input

• 200 W rated power

All parameters should be selected according to the treatment area, cartridge depth, client condition and recommended professional protocol.

How a Professional Treatment Session Works

1. Consultation and Assessment

The operator reviews the client’s treatment goals, medical history, skin condition, tissue thickness and contraindications.

2. Handle and Cartridge Selection

The Face or Body Handle is selected, followed by the cartridge depth appropriate for the treatment area.

3. Skin Preparation

The treatment area is cleansed, marked where required and prepared using the recommended coupling medium.

4. Parameter Selection

The operator selects the energy, dot spacing and single-shot or continuous mode according to the approved protocol.

5. Controlled Energy Delivery

The treatment is performed using correct positioning and technique. Client comfort and skin response should be monitored throughout the session.

6. Post-Treatment Care

The treatment area is cleaned and the client receives appropriate aftercare guidance.

Temporary redness, sensitivity, swelling, tenderness or tingling may occur. Recovery experience varies according to the area treated, energy settings and individual response.

Technical Specifications

Specifications may be updated or vary according to the production configuration. Request the current technical datasheet before ordering.

What Is Included?

Main Equipment

• One portable 7D HIFU touchscreen console

• One Face Handle

• One Body Handle

• Power cable suitable for the selected market

Face Cartridges

• One 1.5 mm cartridge

• One 2.0 mm, 5.5 MHz cartridge

• One 3.0 mm cartridge

• One 4.5 mm cartridge

Body Cartridges

• One 6.0 mm cartridge

• One 9.0 mm cartridge

• One 13.0 mm cartridge

Documentation and Support

• English user manual

• Setup guidance
  

• Treatment-protocol guidance

• Cleaning and maintenance instructions

• Basic troubleshooting assistance

Final package contents and cartridge shot capacity should be confirmed on the quotation before payment.

Professional Training and Support

Wikbeauty provides remote guidance to help buyers understand:

• Equipment installation

• Touchscreen navigation

• Handle and cartridge installation

• Cartridge-depth selection

• Basic parameter adjustment

• Facial and body treatment protocols

• Eye-area safety considerations

• Cleaning and routine maintenance

• Basic troubleshooting

Training materials support equipment familiarization but do not replace any professional qualification, anatomy training or license required in the operator’s jurisdiction.

Three-Year Warranty

The Wikbeauty Portable 7D HIFU Machine is supported by a three-year limited warranty, providing long-term protection for your equipment investment.

Warranty Coverage

Subject to the official warranty conditions, coverage may include eligible manufacturing defects involving:

• Main machine unit

• Internal electronic components

• Touchscreen and control system

• Original Face and Body Handles

• Handle connectors

• Other eligible original machine components

Cartridges are limited-use components and may have separate warranty or replacement conditions.

Technical Support Process

If a technical issue occurs, the Wikbeauty support team will assist with:

1. Remote technical assessment

2. Guided diagnostic testing

3. Identification of the affected component

4. Confirmation of warranty eligibility

5. Replacement-part assistance where applicable

6. Remote installation guidance

Warranty Exclusions

The warranty does not normally cover:

• Accidental or cosmetic damage

• Misuse or incorrect operation

• Unauthorized repairs or modifications

• Incorrect voltage or electrical connection

• Improper cleaning, storage or transportation

• Normal cartridge depletion

• Damage caused by dropping a handle

• Blocked, damaged or incorrectly installed cartridges

• Failure to follow the operating manual

Order information, the machine serial number, photographs and diagnostic videos may be required when requesting warranty service.

All coverage remains subject to Wikbeauty’s official warranty policy.

Safety and Contraindications

This system is professional aesthetic equipment and must only be operated by appropriately trained personnel.

A complete consultation and contraindication assessment must be performed before every treatment.

HIFU treatment may not be appropriate for individuals with:

• Pregnancy or suspected pregnancy

• Implanted electronic devices

• Metallic implants in or near the treatment area

• Active cancer

• Serious cardiovascular conditions

• Blood-clotting disorders

• Uncontrolled medical conditions

• Active infections or inflammation

• Open wounds in the treatment area

• Severe skin disorders

• Conditions affecting normal healing

• Recent surgery or injectable treatment in the area

• Other contraindications identified in the operating manual

Energy must not be applied over the eyes, thyroid, major nerves, blood vessels, bones or other prohibited anatomical structures.

This is not an exhaustive contraindication list. Operators must follow the supplied manual, professional training requirements and applicable local regulations. Medical guidance should be obtained whenever treatment suitability is uncertain.

Intended Professional Users

The portable 7D HIFU system is suitable for:

• Beauty salons

• Aesthetic clinics

• Medical spas

• Skin-rejuvenation studios

• Body-contouring centers

• Qualified independent practitioners

• Appropriately equipped mobile aesthetic professionals

The machine is not designed for casual or unsupervised home use.

Why Choose the Wikbeauty Portable 7D HIFU Machine?

Dedicated Face and Body Handles

Separate handles help operators select the correct equipment for facial and deeper body applications.

Seven Cartridge Depths

A complete 1.5–13 mm cartridge range supports multiple face, neck and body treatment areas.

Specialized Eye-Area Option

The 2.0 mm, 5.5 MHz cartridge provides an additional precision option for appropriately selected areas around the eyes.

High Cartridge Capacity

Cartridges are rated for approximately 10,000–20,000 shots, depending on the cartridge and production configuration.

Portable Professional Design

The 17 kg desktop format can be repositioned more easily than a large floor-standing system.

Long-Term Equipment Support

Remote training, technical assistance and a three-year limited warranty are included.

Frequently Asked Questions

What is the difference between the Face Handle and Body Handle?

The Face Handle uses 1.5 mm, 2.0 mm, 3.0 mm and 4.5 mm cartridges for facial and neck applications. The Body Handle uses deeper 6.0 mm, 9.0 mm and 13.0 mm cartridges for professional body-contouring treatments.

What is special about the 2.0 mm cartridge?

The 2.0 mm cartridge operates at 5.5 MHz and is intended for precise treatment of suitable areas around the eyes. It must only be used by a trained operator with appropriate knowledge of facial anatomy.

How many shots does each cartridge provide?

The supplied specifications indicate approximately 10,000–20,000 shots per cartridge. Confirm the capacity of each cartridge before ordering.

Is treatment painful?

Client experience varies according to the treatment area, energy setting and individual sensitivity. Clients may experience warmth, tingling or temporary discomfort. Treatment should not be described as completely painless.

Is there any downtime?

Recovery experience varies. Some clients may resume normal activities shortly after treatment, while temporary redness, swelling, tenderness or sensitivity may occur.

When can clients expect results?

Some clients may notice early changes, while tissue-remodeling responses can continue over the following weeks or months. Results and timelines cannot be guaranteed.

Is this machine suitable for mobile practitioners?

Its portable design may suit qualified mobile professionals. Safe transportation, stable installation, hygiene control, insurance and compliance with local regulations remain essential.

Does the machine work with international power supplies?

The system is specified for AC 100–240 V, 50/60 Hz. The correct regional plug and electrical configuration should be confirmed before ordering.

Is training included?

Remote setup and operating guidance are included. Operators must still meet all professional qualification and licensing requirements applicable in their market.

What does the three-year warranty cover?

The limited warranty covers eligible manufacturing defects in approved machine components. Cartridges, normal wear, accidental damage, misuse and unauthorized modifications are excluded.

Does the machine include CE and RoHS documentation?

Yes. The Wikbeauty Portable 7D HIFU Machine comes with CE and RoHS certificates.

Expand Your Services with Portable Face and Body HIFU

The Wikbeauty Portable 7D HIFU Machine combines two dedicated handles and seven treatment depths within one compact professional platform.

Use it to develop treatment services for:

1. Facial lifting and firming

2. Precision eye-area treatments

3. Jawline and neck contouring

4. Professional body contouring

Contact Wikbeauty for current pricing, the complete technical datasheet, cartridge information and purchasing guidance.

Request Pricing and Product Consultation

Professional 5-in-1 HIFU and Aesthetic Treatment System

Five Dedicated Technologies for Facial Rejuvenation, Body Contouring and Intimate Care

The Wikbeauty 5-in-1 Multifunctional HIFU Machine combines five professional aesthetic technologies within one touchscreen platform.

With dedicated handles for 8D HIFU, Liposonic body contouring, RF microneedling, Radar Carving and intimate care, the system allows beauty salons, med spas and aesthetic clinics to expand their treatment menus without purchasing multiple standalone machines.

Each technology has its own handle, cartridges and adjustable treatment parameters, giving trained operators greater control when developing professional face and body treatment protocols.

Five technologies | Five dedicated handles | 15-inch touchscreen | Three-year warranty

Five Professional Technologies in One System

8D HIFU

The 8D HIFU handle delivers focused ultrasound energy at selectable depths for professional facial and neck treatments.

It is designed to support non-surgical treatment programs focused on:

• Facial lifting

• Skin firming

• Jawline definition

• Neck treatments

• Brow-area lifting

• Improvement in the appearance of fine lines

The handle is supplied with 3.0 mm and 4.5 mm cartridges for treatments at different tissue depths.

Liposonic Body Contouring

The Liposonic handle delivers focused ultrasound energy at deeper levels for professional body-contouring applications.

With 8 mm and 13 mm cartridges, it is designed for larger body areas such as:

• Abdomen

• Waist and flanks

• Upper and lower back

• Upper arms

• Thighs

• Buttocks

The correct cartridge, energy setting and treatment technique should be selected following a complete client consultation.

RF Microneedling

The RF Microneedling handle combines controlled microneedling with bipolar radiofrequency energy.

It is designed to support professional treatments focused on:

• Skin-texture improvement

• Enlarged-pore appearance

• Uneven skin tone

• Fine-line appearance

• General skin rejuvenation

• Targeted facial and body protocols

Four cartridge options allow operators to adapt the treatment to different areas and professional objectives:

• 10-pin

• 25-pin

• 64-pin

• Nano-pin

Radar Carving

The Radar Carving handle is designed for focused aesthetic treatments at selectable depths.

With 1.5 mm, 3.0 mm and 4.5 mm cartridges, it can be incorporated into professional skin-firming and contour-refinement protocols.

Common applications include:

• Facial contouring

• Jawline definition

• Skin firming

• Localized contour refinement

• Complementary treatments alongside other technologies

Intimate Care

The dedicated Intimate Care handle expands the machine’s applications into professional intimate wellness and rejuvenation services.

It includes 3.0 mm and 4.5 mm cartridges and must only be used by appropriately trained professionals following strict consultation, hygiene, consent and safety procedures.

Availability and permitted use of intimate treatments may vary by country or region.

One Console, Five Dedicated Handles

Each technology is delivered through its own dedicated treatment handle.

This provides several practical advantages:

• No need to purchase five separate machines

• Reduced treatment-room floor space

• Centralized touchscreen operation

• Dedicated cartridges for each application

• Easier organization of face and body services

• Greater flexibility when expanding a treatment menu

• Multiple cross-service and package opportunities

Each treatment remains technically distinct. Operators must follow the correct protocol for the handle, cartridge and treatment area selected.

Professional Face and Body Applications

Treatment outcomes vary according to the client’s condition, treatment parameters, treatment schedule and individual response.

Adjustable Cartridges for Different Treatment Depths

8D HIFU Cartridges

• 3.0 mm

• 4.5 mm

Liposonic Body Cartridges

• 8 mm

• 13 mm

Radar Carving Cartridges

• 1.5 mm

• 3.0 mm

• 4.5 mm

Intimate Care Cartridges

• 3.0 mm

• 4.5 mm

RF Microneedling Cartridges

• 10-pin

• 25-pin

• 64-pin

• Nano-pin

Cartridge depth and treatment parameters must be selected by a trained operator according to the treatment area, client suitability and recommended protocol.

Build a More Complete Treatment Menu

Facial Lifting and Firming

The 8D HIFU and Radar Carving handles can support professional treatment programs focused on facial contouring, skin firming and jawline definition.

Advanced Skin Rejuvenation

The RF Microneedling handle adds customizable treatments for skin texture, pore appearance, fine lines and overall skin quality.

Professional Body Contouring

The Liposonic handle provides deeper treatment depths for larger body areas, including the abdomen, waist, arms and thighs.

Intimate Wellness Services

The dedicated Intimate Care handle allows qualified providers to add specialized intimate rejuvenation treatments where legally permitted.

Combination Treatment Planning

Where appropriate, trained professionals may develop treatment plans using more than one technology. Each treatment should be performed according to its individual protocol rather than applying multiple technologies indiscriminately.

How a Professional Treatment Session Works

1. Consultation and Assessment

The operator reviews the client’s concerns, medical history, treatment goals and contraindications. The appropriate technology is selected only after confirming suitability.

2. Handle and Cartridge Selection

The correct handle and cartridge depth are selected according to the treatment area and intended protocol.

3. System Preparation

The handle is attached and checked before use. Conductive gel or other required treatment materials are applied where specified in the operating instructions.

4. Parameter Selection

The operator adjusts the energy output and other available settings according to the technology, cartridge depth, treatment area and client tolerance.

5. Controlled Treatment

The selected handle is applied using the recommended technique. Treatment duration depends on the technology, body area and professional protocol.

6. Post-Treatment Care

The treatment area is cleaned and the client receives appropriate aftercare guidance.

Temporary redness, sensitivity, swelling, tenderness or other expected responses may occur depending on the technology used. Recovery experience varies between individuals.

Designed for Daily Professional Operation

The system brings all five technologies together through a 15-inch color touchscreen interface.

Professional operating features include:

• Five dedicated treatment handles

• Large color touchscreen

• Adjustable energy settings

• Multiple treatment cartridges

• Facial and body applications

• Universal AC 110–220 V input

• Compact multifunctional design

• Dedicated protocols for each technology

Technical Specifications

Technical specifications may be updated or vary according to production configuration. Request the current technical datasheet and electrical requirements before ordering.

What Is Included?

Main Equipment

• One 5-in-1 touchscreen console

• One 8D HIFU handle

• One Liposonic handle

• One RF Microneedling handle

• One Radar Carving handle

• One Intimate Care handle

• Power cable

• Starter conductive gel, where applicable

8D HIFU Cartridges

• One 3.0 mm cartridge

• One 4.5 mm cartridge

Liposonic Cartridges

• One 8 mm cartridge

• One 13 mm cartridge

Radar Carving Cartridges

• One 1.5 mm cartridge

• One 3.0 mm cartridge

• One 4.5 mm cartridge

Intimate Care Cartridges

• One 3.0 mm cartridge

• One 4.5 mm cartridge

RF Microneedling Cartridges

• 10-pin cartridge

• 25-pin cartridge

• 64-pin cartridge

• Nano-pin cartridge

Package contents should be confirmed against the final quotation before payment.

Professional Training and Support

Wikbeauty provides remote guidance covering:

• Machine installation and initial setup

• Touchscreen navigation

• Handle and cartridge installation

• Basic parameter selection

• Treatment-protocol guidance

• Cleaning and routine maintenance

• Safety procedures

• Basic fault diagnosis and troubleshooting

Three-Year Warranty

The Wikbeauty 5-in-1 Multifunctional HIFU Machine is supported by a three-year limited warranty, providing long-term protection for your equipment investment.

Warranty Coverage

Subject to the official warranty terms, coverage may include eligible manufacturing defects involving:

• Main machine unit

• Internal electronic components

• Touchscreen and control system

• Original treatment handles

• Handle connectors

• Other eligible original components

Cartridges, microneedling tips and other consumable or limited-use components may have different coverage terms.

Technical Support Process

If a technical issue occurs, the Wikbeauty support team will assist with:

1. Remote technical assessment

2. Guided troubleshooting

3. Identification of the affected component

4. Confirmation of warranty eligibility

5. Replacement-part assistance where applicable

6. Remote installation guidance

Warranty Exclusions

The warranty does not normally cover:

• Accidental or cosmetic damage

• Incorrect operation or misuse

• Unauthorized repairs or modifications

• Incorrect voltage or electrical connection

• Improper cleaning, disinfection or storage

• Normal wear of cartridges and consumables

• Damage caused by unsuitable treatment materials

• Failure to follow the operating manual

• Unauthorized transportation damage

The order number, machine serial number, photos and diagnostic videos may be required when requesting warranty support.

All coverage remains subject to Wikbeauty’s official warranty policy.

Safety and Contraindications

This system is professional aesthetic equipment and should only be used by appropriately trained personnel.

A complete consultation, informed consent process and contraindication assessment must be completed before every treatment.

Depending on the selected technology, treatment may not be suitable for individuals with:

• Pregnancy or suspected pregnancy

• Implanted electronic or metallic devices

• Active cancer

• Serious cardiovascular conditions

• Blood-clotting disorders

• Uncontrolled medical conditions

• Active infections

• Open wounds

• Severe inflammatory skin conditions

• Conditions that affect normal healing

• Recent surgery in the treatment area

• Use of certain medications

• Other contraindications identified in the operating manual

Additional Microneedling Requirements

RF microneedling must be performed using appropriate hygiene, sterilization and infection-control procedures. Single-use components must not be reused.

Additional Intimate Care Requirements

Intimate treatments require appropriate professional training, privacy procedures, informed consent and strict hygiene controls. Operators must confirm that the treatment is permitted within their professional scope and local regulations.

This is not an exhaustive contraindication list. Medical guidance should be obtained whenever treatment suitability is uncertain.

Intended Professional Users

This multifunctional system is suitable for:

• Aesthetic clinics

• Medical spas

• Beauty salons

• Skin-rejuvenation studios

• Body-contouring centers

• Qualified independent practitioners

• Businesses expanding their treatment services

The machine is not designed for casual, unsupervised home use.

Why Choose a 5-in-1 Aesthetic System?

Five Technologies from One Console

Offer facial lifting, body contouring, RF microneedling, contour refinement and intimate care without maintaining five separate control units.

Dedicated Handle for Each Application

Each technology has a purpose-specific handle and cartridge system.

Face and Body Treatment Flexibility

Build individual services or structured treatment programs around different client concerns.

More Efficient Use of Space

One multifunctional platform requires less floor space than several standalone machines.

Long-Term Equipment Support

The system includes remote training, ongoing technical assistance and a three-year limited warranty.

Frequently Asked Questions

What does “5-in-1” mean?

The system includes five dedicated technologies: 8D HIFU, Liposonic, RF Microneedling, Radar Carving and Intimate Care. Each technology has its own treatment handle.

Can multiple technologies be used in one treatment plan?

Qualified operators may develop combination treatment plans where clinically appropriate. Treatment order, timing and compatibility must be based on proper training, client suitability and the manufacturer’s protocols.

What is the difference between 8D HIFU and Liposonic?

The supplied 8D HIFU cartridges are intended for shallower facial and neck applications. The 8 mm and 13 mm Liposonic cartridges are designed for deeper body-contouring applications.

What is Radar Carving used for?

Radar Carving uses cartridges at 1.5 mm, 3.0 mm and 4.5 mm depths for professional firming and contour-refinement treatments.

Is the machine suitable for beginners?

The touchscreen system is designed for straightforward operation, but the treatments require professional knowledge. Operators must complete appropriate training and satisfy local qualification requirements.

Is there any downtime?

Recovery experience depends on the technology, treatment intensity and individual client response. Temporary redness, swelling, tenderness or sensitivity may occur. “Zero downtime” should not be guaranteed.

When can clients expect results?

Results and timelines vary. The selected technology, treatment settings, client condition and individual biological response all influence the outcome.

Is training included?

Remote setup, operating guidance and training materials are included. This does not replace any locally required professional qualification or license.

What does the three-year warranty cover?

The limited warranty covers eligible manufacturing defects in approved machine components. Consumables, misuse, accidental damage and unauthorized modifications are excluded.

Does the machine have CE and RoHS documentation?

CE and RoHS 

Expand Your Treatment Menu with One Professional Platform

The Wikbeauty 5-in-1 Multifunctional HIFU Machine brings five complementary aesthetic technologies into one compact system:

1. 8D HIFU

2. Liposonic

3. RF Microneedling

4. Radar Carving

5. Intimate Care

Contact Wikbeauty for the current technical datasheet, cartridge details, training information and purchasing assistance.

Request Pricing and Product Consultation

Professional 5-in-1 HIFU and RF Microneedling System

Five Dedicated Technologies for Face, Body and Intimate-Care Applications

The Wikbeauty 5-in-1 8D HIFU Machine combines five professional aesthetic technologies within one compact desktop platform.

Dedicated handles for 8D HIFU, Liposonic Thermal Sculpting, Radar Carving, Gold RF Microneedling and Intimate HIFU allow trained professionals to develop facial lifting, skin-rejuvenation, body-contouring and intimate-care services from one system.

A 15-inch intelligent touchscreen, adjustable energy settings and interchangeable cartridges provide controlled operation across different treatment areas and protocols.

Five technologies | Five dedicated handles | 15-inch touchscreen | Three-year warranty

Five Professional Technologies in One Machine

8D HIFU

The 8D HIFU handle delivers multiple focused-ultrasound treatment lines with each activation.

It includes:

• 3.0 mm cartridge at 7 MHz

• 4.5 mm cartridge at 4 MHz

These cartridge depths support professional protocols focused on facial lifting, skin firming, jawline definition and suitable neck treatments.

The supplied specification indicates up to 12 treatment lines per activation and up to 10,000 shots per cartridge, depending on the cartridge and operating configuration.

Liposonic Thermal Sculpting

The Liposonic handle provides deeper focused-energy delivery for appropriately selected body areas.

It includes:

• 8.0 mm cartridge

• 13.0 mm cartridge

Common treatment areas include:

• Abdomen

• Waist and flanks

• Upper and lower back

• Upper arms

• Thighs

• Hips

• Buttocks

Cartridge selection must be based on the client’s anatomy, tissue thickness and professional treatment protocol.

Radar Carving

The Radar Carving handle supports controlled treatments at three selectable depths:

• 1.5 mm

• 3.0 mm

• 4.5 mm

It can be incorporated into professional protocols focused on skin firming, facial contour refinement and selected face or neck applications.

Gold RF Microneedling

The Gold RF Microneedling handle combines controlled needle penetration with radiofrequency energy.

It includes:

• 10-pin cartridge

• 25-pin cartridge

The needles create controlled microchannels while RF energy is delivered at the selected depth. This technology can support treatments focused on:

• Skin-texture improvement

• Fine-line appearance

• Enlarged-pore appearance

• Uneven-looking skin tone

• Acne-scar appearance

• General skin rejuvenation

RF microneedling is minimally invasive and requires strict hygiene, infection-control and aftercare procedures.

Intimate HIFU

The dedicated Intimate HIFU handle delivers focused ultrasound through a 360° treatment format.

It includes:

• 3.0 mm cartridge

• 4.5 mm cartridge

This handle is designed for specialized professional intimate-care protocols where legally permitted.

It must only be used by appropriately qualified professionals following consultation, informed consent, privacy, hygiene and safety requirements.

Multi-Line 8D HIFU Delivery

The 8D HIFU handle is designed to deliver up to 12 treatment lines per activation.

Compared with a conventional single-line system, this may provide:

• More efficient treatment-area coverage

• More consistent line placement

• Reduced repetitive repositioning

• Streamlined facial treatment workflows

• Greater coverage across appropriate areas

“8D” is the commercial name of the treatment platform. It should not be interpreted as meaning the handle delivers exactly eight lines.

Multi-line delivery does not remove the need for correct spacing, safe energy selection or professional knowledge of facial anatomy.

Treatment Handles and Cartridge Depths

The correct handle, cartridge and parameters must be selected according to the treatment area, client suitability and professional protocol.

Professional Face, Body and Intimate-Care Applications

Individual results vary according to client condition, tissue depth, treatment settings, treatment frequency and biological response.

How the Technologies Work

Focused Ultrasound

The 8D HIFU, Liposonic, Radar Carving and Intimate HIFU handles deliver focused energy to a selected depth below the surface.

When applied correctly, the controlled focal points support the body’s natural tissue-remodeling and collagen-response processes.

Radiofrequency Microneedling

The Gold RF Microneedling handle uses fine needles to deliver radiofrequency energy at a controlled depth.

This produces a targeted treatment response designed to support collagen remodeling and improvement in the appearance of skin texture.

RF microneedling is not a laser treatment and does not rely on light energy.

Build a Complete Professional Service Menu

Facial Lifting and Firming

Use the 8D HIFU handle for professional face, jawline and suitable neck protocols.

Skin-Rejuvenation Treatments

The Gold RF Microneedling handle adds targeted services focused on texture, pores, fine lines and scar appearance.

Body-Contouring Services

The 8.0 mm and 13.0 mm Liposonic cartridges support treatments for appropriately selected body areas.

Contour-Refinement Treatments

The Radar Carving handle provides three depth options for focused facial and body protocols.

Intimate Wellness Services

The Intimate HIFU handle enables qualified providers to add specialized services where permitted within their professional scope.

Combination Treatment Planning

Qualified operators may develop plans using more than one technology where appropriate. Treatment sequence, compatibility and intervals must follow professional training and manufacturer protocols.

Compact Professional Desktop Design

The system combines five treatment technologies in a desktop housing measuring approximately 58 × 44 × 44 cm.

Key operating features include:

• 15-inch intelligent color touchscreen

• Five dedicated treatment handles

• Pre-programmed treatment modes

• Adjustable energy from 0.1–3.0 J

• Temperature monitoring

• Automatic shut-off

• Adjustable operating limits

• AC 110–240 V compatibility

• Approximately 19 kg net weight

The machine should be installed on a stable treatment trolley or work surface with sufficient ventilation.

How a Professional Treatment Session Works

1. Consultation and Assessment

The operator reviews the client’s concerns, treatment goals, medical history, tissue condition and contraindications.

Intimate treatments require additional privacy, informed-consent and professional-scope procedures.

2. Handle Selection

The appropriate handle is selected according to whether the treatment focuses on lifting, skin rejuvenation, body contouring or intimate care.

3. Cartridge Selection

The operator installs the cartridge or microneedling tip appropriate for the treatment area.

4. Treatment Preparation

The area is cleansed and prepared. Conductive gel or another approved coupling material is applied where required.

Sterile preparation and single-use needle cartridges are required for RF microneedling.

5. Parameter Selection

Energy, depth, delivery mode and other settings are selected according to the approved protocol.

6. Controlled Treatment

The treatment is performed using correct placement and technique while monitoring client comfort and tissue response.

7. Post-Treatment Care

The treatment area is cleaned and the client receives technology-specific aftercare instructions.

Temporary redness, swelling, sensitivity, tenderness, tingling or pinpoint crusting may occur. Recovery experience varies between treatments and clients.

Technical Specifications

The stated 60–70°C figure refers to the manufacturer-specified focal thermal setting. It must not be interpreted as a safe surface temperature or used without the supplied professional protocol.

Specifications may be updated according to the final production configuration.

What Is Included?

Main Equipment

• One 5-in-1 desktop touchscreen console

• One 8D HIFU handle

• One Liposonic Thermal Sculpting handle

• One Radar Carving handle

• One Gold RF Microneedling handle

• One Intimate HIFU handle

• Universal power cable

• Starter conductive gel

8D HIFU Cartridges

• 3.0 mm

• 4.5 mm

Liposonic Cartridges

• 8.0 mm

• 13.0 mm

Radar Carving Cartridges

• 1.5 mm

• 3.0 mm

• 4.5 mm

Intimate HIFU Cartridges

• 3.0 mm

• 4.5 mm

RF Microneedling Tips

• 10-pin

• 25-pin

Documentation and Certification

• English user manual

• CE certificate

• RoHS certificate

• Installation and setup guidance
  

• Treatment-protocol guidance

• Cleaning and maintenance instructions

• Basic troubleshooting assistance

Final cartridge quantities and package contents should be confirmed on the order quotation.

CE and RoHS Certified

The Wikbeauty 5-in-1 8D HIFU Machine comes with:

• CE Certificate

• RoHS Certificate

These certificates are included with the machine and support its professional positioning and international distribution.

Professional Training and Support

Wikbeauty provides remote training and operating guidance covering:

• Machine installation and setup

• Touchscreen operation

• 8D HIFU operation

• Liposonic operation

• Radar Carving operation

• RF Microneedling operation

• Intimate HIFU operation

• Handle and cartridge installation

• Basic treatment-parameter selection

• Hygiene and infection-control procedures

• Facial, body and intimate-care protocols

• Cleaning and routine maintenance

• Basic troubleshooting

Training supports equipment familiarization but does not replace professional qualifications, anatomy training, intimate-care training or licenses required in the operator’s jurisdiction.

Three-Year Warranty

The Wikbeauty 5-in-1 8D HIFU Machine is supported by a three-year limited warranty covering eligible parts and labor.

Warranty Coverage

Subject to the official warranty conditions, coverage may include eligible manufacturing defects affecting:

• Main machine unit

• Internal electronic components

• Touchscreen and control system

• Original treatment handles

• Temperature-monitoring system

• Handle connectors

• Other eligible original components

• Eligible repair labor during the warranty period

Cartridges, microneedling tips and other limited-use components may have separate warranty conditions.

Technical Support Process

If a technical issue occurs, Wikbeauty will assist with:

1. Remote technical assessment

2. Guided diagnostic testing

3. Identification of the affected component

4. Confirmation of warranty eligibility

5. Replacement-part or repair assistance where applicable

6. Remote installation guidance

Warranty Exclusions

The warranty does not normally cover:

• Accidental or cosmetic damage

• Incorrect operation or misuse

• Unauthorized repair or modification

• Incorrect voltage or electrical connection

• Improper cleaning, disinfection or storage

• Damage caused by dropping a handle

• Normal cartridge or tip depletion

• Reuse of single-use microneedling tips

• Unauthorized transportation damage

• Failure to follow the operating manual

Order information, the machine serial number, photographs and diagnostic videos may be required when requesting warranty support.

All coverage remains subject to Wikbeauty’s official warranty policy.

Safety and Contraindications

This system is professional aesthetic equipment and must only be operated by appropriately trained personnel.

A complete consultation, informed-consent process and contraindication assessment must be completed before every treatment.

Depending on the selected technology, treatment may not be suitable for individuals with:

• Pregnancy or suspected pregnancy

• Implanted electronic devices

• Metallic implants in or near the treatment area

• Active cancer

• Serious cardiovascular conditions

• Blood-clotting disorders

• Uncontrolled medical conditions

• Active infection or inflammation

• Open wounds

• Severe skin conditions

• Conditions affecting normal healing

• Recent surgery in the treatment area

• Recent injectable treatments

• Use of medication affecting healing or bleeding

• Other contraindications listed in the operating manual

RF Microneedling Safety

RF microneedling requires appropriate disinfection and infection-control procedures. Single-use needle cartridges must not be reused.

Intimate HIFU Safety

Intimate treatments require specialist training, privacy safeguards, informed consent and strict hygiene controls.

Operators must confirm that intimate treatments are permitted within their professional scope and local regulations. Incorrect depth, temperature or placement can cause tissue injury.

This is not an exhaustive contraindication list. Medical guidance should be obtained whenever treatment suitability is uncertain.

Intended Professional Users

The 5-in-1 8D HIFU Machine is suitable for:

• Aesthetic clinics

• Medical spas

• Beauty salons

• Skin-rejuvenation studios

• Body-contouring centers

• Qualified intimate-care providers

• Appropriately trained independent practitioners

The machine is not intended for casual or unsupervised home use.

Why Choose This 5-in-1 System?

Five Dedicated Treatment Technologies

Provide professional facial lifting, skin rejuvenation, body contouring and intimate-care services from one platform.

Efficient Multi-Line HIFU

The 8D HIFU handle can deliver up to 12 treatment lines per activation for efficient area coverage.

Professional RF Microneedling

The 10-pin and 25-pin tips support precise, depth-controlled skin-rejuvenation protocols.

Face and Body Depth Options

Cartridges range from 1.5 mm for superficial protocols to 13.0 mm for deeper body applications.

Compact Desktop Format

Five treatment technologies are integrated within a system weighing approximately 19 kg.

Professional Certifications

The machine comes with CE and RoHS certificates.

Long-Term Equipment Support

Remote training, technical assistance and a three-year limited warranty covering eligible parts and labor are included.

Frequently Asked Questions

What does “5-in-1” mean?

The system combines 8D HIFU, Liposonic Thermal Sculpting, Radar Carving, Gold RF Microneedling and Intimate HIFU. Each technology has a dedicated handle.

How is 8D HIFU different from conventional HIFU?

The 8D handle can deliver multiple treatment lines per activation, providing more efficient coverage than a conventional single-line system.

Does “8D” mean eight treatment lines?

No. “8D” is the commercial name of the system. The supplied specification indicates up to 12 treatment lines per activation.

Is RF microneedling non-invasive?

No. RF microneedling is minimally invasive because the needles penetrate the skin. Appropriate hygiene and post-treatment care are required.

What is Radar Carving used for?

The Radar Carving handle includes 1.5 mm, 3.0 mm and 4.5 mm cartridges for professional firming and contour-refinement protocols.

What is the Liposonic handle used for?

The 8.0 mm and 13.0 mm Liposonic cartridges are intended for body-contouring treatments on appropriately selected areas.

Is there any downtime?

Recovery varies by technology. RF microneedling may produce temporary redness, swelling or pinpoint crusting. Ultrasound treatments may cause temporary sensitivity, tenderness or swelling.

How many sessions will a client need?

Treatment frequency depends on the technology, treatment area, client condition and professional protocol. A fixed number of sessions or guaranteed result should not be promised.

What does the three-year warranty cover?

The limited warranty covers eligible manufacturing defects affecting approved machine components and eligible repair labor. Cartridges, tips, normal wear, accidental damage and misuse are excluded.

Does the machine come with CE and RoHS certificates?

Yes. The Wikbeauty 5-in-1 8D HIFU Machine comes with CE and RoHS certificates.

Expand Your Face, Body and Intimate-Care Services

The Wikbeauty 5-in-1 8D HIFU Machine combines:

1. 8D HIFU

2. Liposonic Thermal Sculpting

3. Radar Carving

4. Gold RF Microneedling

5. Intimate HIFU

Contact Wikbeauty for current pricing, delivery information and purchasing assistance.

Request Pricing and Product Consultation

Professional 3-in-1 7D, 8D and Thermal Shaping System

Three Dedicated Handles for Facial Lifting and Body Contouring

The Wikbeauty 7D, 8D and Thermal Shaping 3-in-1 Machine combines three professional treatment handles within one floor-standing touchscreen system.

The 7D and 8D handles provide focused ultrasound options for facial lifting, skin firming and contour refinement. The Thermal Shaping handle adds deeper body-contouring applications for areas such as the abdomen, waist, arms and thighs.

With seven included cartridges across five distinct treatment depths, the system gives trained operators the flexibility to develop professional face and body treatment protocols from one platform.

Three dedicated handles | Seven cartridges | Face and body applications | Three-year warranty

Three Professional Technologies in One System

7D HIFU Handle

The 7D handle is supplied with three cartridge depths for professional facial and neck treatments:

• 1.5 mm

• 3.0 mm

• 4.5 mm

These cartridges allow trained operators to select an appropriate treatment depth for different facial areas and tissue layers.

Common applications include:

• Facial skin firming

• Improvement in the appearance of fine lines

• Brow-area lifting

• Cheek contouring

• Jawline definition

• Neck treatments

8D HIFU Handle

The 8D handle includes 3.0 mm and 4.5 mm cartridges for focused facial lifting and contour-refinement protocols.

It can be incorporated into treatments focused on:

• Lower-face firming

• Cheek lifting

• Jawline contouring

• Neck tightening

• Deeper facial treatment protocols

The 7D and 8D handles provide different delivery formats. The appropriate handle should be selected according to the treatment area, client condition and professional protocol.

Thermal Shaping Handle

The Thermal Shaping handle extends the system’s applications from facial treatments to professional body contouring.

It includes:

• 0.8 mm cartridge

• 13 mm cartridge

The deeper cartridge is designed for body areas with suitable subcutaneous tissue, while the shallower cartridge supports more targeted treatment protocols.

Common treatment areas include:

• Abdomen

• Waist and flanks

• Upper and lower back

• Upper arms

• Thighs

• Hips

• Buttocks

Seven Cartridges Across Five Treatment Depths

The system includes seven cartridges in total. Some depths appear on both the 7D and 8D handles.

The five distinct depths are:

0.8 mm · 1.5 mm · 3.0 mm · 4.5 mm · 13 mm

Cartridge selection must be based on client anatomy, tissue thickness, treatment area and professional training.

How the System Works

The machine delivers controlled focused energy through the selected handle and cartridge.

For facial applications, the 7D and 8D handles direct energy to a defined depth below the skin’s surface. When used correctly, this controlled energy supports the body’s natural tissue-remodeling and collagen-response processes.

For body applications, the Thermal Shaping handle provides deeper treatment options for appropriately selected areas with localized tissue concerns.

The touchscreen interface allows the operator to select the applicable handle, cartridge and treatment parameters.

Individual outcomes vary according to age, skin condition, tissue thickness, treatment settings and biological response.

Professional Face and Body Applications

Treatment suitability should be confirmed through a complete consultation and contraindication assessment.

Build a Focused Treatment Menu

Facial Firming Treatments

Use the 7D handle with 1.5 mm, 3.0 mm and 4.5 mm cartridges to develop professional facial protocols at multiple depths.

Focused Lifting Treatments

The 8D handle provides an additional treatment format for the cheeks, jawline, lower face and neck.

Jawline and Neck Contouring

Both facial handles can support structured protocols for clients concerned with lower-face definition and skin laxity.

Professional Body Contouring

The Thermal Shaping handle expands the service menu to include suitable areas of the abdomen, waist, back, arms and thighs.

Combination Treatment Planning

Qualified operators may build structured treatment plans using different handles. Each area must be assessed independently, and the technologies should only be combined when appropriate.

Designed for Professional Treatment Environments

The black-and-white floor-standing console combines three treatment technologies in one organized system.

Key design features include:

• Integrated touchscreen control

• Three dedicated treatment handles

• Side-mounted handle storage

• Seven included cartridges

• Facial and body treatment capabilities

• 110 V and 230 V power options

• Stable floor-standing construction

• Centralized operation from one console

At 47 kg, the machine is intended to remain stable during daily professional use while still allowing planned repositioning within a treatment environment.

How a Professional Treatment Session Works

1. Consultation and Assessment

The operator reviews the client’s treatment goals, medical history, skin condition, tissue thickness and contraindications.

2. Handle Selection

The 7D, 8D or Thermal Shaping handle is selected according to whether the treatment is focused on facial lifting, skin firming or body contouring.

3. Cartridge Selection

The appropriate cartridge depth is selected according to the treatment area and client anatomy.

4. Treatment Preparation

The treatment area is cleansed and marked where necessary. Conductive gel or the recommended coupling medium is applied according to the operating instructions.

5. Parameter Selection

The operator adjusts the available settings according to the selected handle, cartridge, treatment area and client tolerance.

6. Controlled Treatment

Energy is delivered using the recommended positioning and technique. The operator monitors the client’s comfort and tissue response throughout the session.

7. Post-Treatment Care

The treatment area is cleaned and the client receives suitable aftercare guidance.

Temporary redness, swelling, tenderness, tingling or sensitivity may occur. Recovery experience varies by technology, treatment intensity and individual response.

Technical Specifications

Specifications may be updated according to the final production configuration.

What Is Included?

Main Equipment

• One 3-in-1 floor-standing touchscreen console

• One 7D HIFU handle

• One 8D HIFU handle

• One Thermal Shaping handle

• Power cable suitable for the selected voltage

• Starter conductive gel, where applicable

7D HIFU Cartridges

• One 1.5 mm cartridge

• One 3.0 mm cartridge

• One 4.5 mm cartridge

8D HIFU Cartridges

• One 3.0 mm cartridge

• One 4.5 mm cartridge

Thermal Shaping Cartridges

• One 0.8 mm cartridge

• One 13 mm cartridge

Documentation and Certification

• English user manual

• CE certificate

• RoHS certificate

• Setup guidance
  

• Treatment-protocol guidance

• Cleaning and maintenance instructions

• Basic troubleshooting assistance

Final package contents should be confirmed on the order quotation.

CE and RoHS Certified

The Wikbeauty 7D, 8D and Thermal Shaping 3-in-1 Machine comes with:

• CE Certificate

• RoHS Certificate

These certificates are included with the machine and support its professional positioning and international distribution.

Professional Training and Support

Wikbeauty provides remote guidance covering:

• Machine installation and setup

• Touchscreen operation

• Handle installation

• Cartridge installation and selection

• Basic treatment-parameter adjustment

• Facial treatment protocols

• Body-contouring protocols

• Cleaning and routine maintenance

• Safety procedures

• Basic troubleshooting

Year Warranty

The Wikbeauty 3-in-1 HIFU and Thermal Shaping Machine is supported by a three-year limited warranty, providing long-term protection for your equipment investment.

Warranty Coverage

Subject to the official warranty conditions, eligible manufacturing defects may be covered for:

• Main machine unit

• Internal electronic components

• Touchscreen and control system

• Original 7D HIFU handle

• Original 8D HIFU handle

• Original Thermal Shaping handle

• Handle connectors

• Other eligible original machine components

Cartridges and other limited-use or consumable components may have separate warranty conditions.

Technical Support Process

If a technical issue occurs, the Wikbeauty support team will assist with:

1. Remote technical assessment

2. Guided diagnostic testing

3. Identification of the affected component

4. Confirmation of warranty eligibility

5. Replacement-part assistance where applicable

6. Remote installation guidance

Warranty Exclusions

The warranty does not normally cover:

• Accidental or cosmetic damage

• Incorrect operation or misuse

• Unauthorized repair or modification

• Incorrect voltage or electrical connection

• Improper cleaning or storage

• Damage caused by dropping a handle

• Normal cartridge depletion

• Incorrect cartridge installation

• Unauthorized transportation damage

• Failure to follow the operating manual

The order number, machine serial number, photographs and diagnostic videos may be required when requesting warranty support.

All coverage remains subject to Wikbeauty’s official warranty policy.

Safety and Contraindications

This system is professional aesthetic equipment and should only be operated by appropriately trained personnel.

A complete consultation and contraindication assessment must be performed before every treatment.

Treatment may not be suitable for individuals with:

• Pregnancy or suspected pregnancy

• Implanted electronic devices

• Metallic implants in or near the treatment area

• Active cancer

• Serious cardiovascular conditions

• Blood-clotting disorders

• Uncontrolled medical conditions

• Active infection or inflammation

• Open wounds in the treatment area

• Severe skin conditions

• Conditions affecting normal healing

• Recent surgery in the proposed treatment area

• Recent injectable treatments in the area

• Other contraindications listed in the operating manual

Energy must not be applied over the eyes, thyroid, major nerves, large blood vessels, bones or other prohibited anatomical structures.

This is not an exhaustive contraindication list. Operators must follow the supplied manual, professional training requirements and applicable local regulations. Medical guidance should be obtained whenever treatment suitability is uncertain.

Intended Professional Users

This 3-in-1 system is suitable for:

• Beauty salons

• Aesthetic clinics

• Medical spas

• Facial-rejuvenation studios

• Body-contouring centers

• Qualified independent practitioners

• Businesses expanding their face and body services

The machine is not designed for casual or unsupervised home use.

Why Choose This 3-in-1 System?

Three Dedicated Treatment Handles

The 7D, 8D and Thermal Shaping technologies each have a dedicated handle for their intended applications.

Complete Face and Body Coverage

Offer professional facial lifting, skin firming and body-contouring services from one platform.

Multiple Treatment Depths

Seven included cartridges provide five distinct depths ranging from 0.8 mm to 13 mm.

Efficient Use of Treatment-Room Space

A single console replaces the need for separate facial HIFU and body-contouring control units.

Professional Certifications

The machine comes with CE and RoHS certificates.

Long-Term Equipment Support

Remote training, technical assistance and a three-year limited warranty are included.

Frequently Asked Questions

What is the difference between the 7D and 8D handles?

The 7D handle includes 1.5 mm, 3.0 mm and 4.5 mm cartridges. The 8D handle includes 3.0 mm and 4.5 mm cartridges and provides an additional delivery format for focused lifting protocols.

The appropriate handle should be selected according to the treatment area and professional protocol rather than describing one handle simply as stronger than the other.

What is the Thermal Shaping handle used for?

The Thermal Shaping handle includes 0.8 mm and 13 mm cartridges for professional body-contouring and firming treatments on appropriately selected areas.

How many cartridges are included?

Seven cartridges are included across the three handles. Because the 3.0 mm and 4.5 mm depths are included with both facial handles, the system has five distinct depth options.

Is treatment painful?

Client experience varies according to the handle, cartridge, energy level and individual sensitivity. Warmth, tingling, tenderness or temporary discomfort may occur.

Is there any downtime?

Recovery experience varies. Some clients may resume normal activities shortly after treatment, while temporary redness, swelling, tenderness or sensitivity may occur.

How many treatments will a client need?

Treatment frequency depends on the technology, treatment area, client condition and professional protocol. A fixed number of sessions or guaranteed outcome should not be promised.

What are the dimensions and weight?

The machine measures approximately 110 × 67 × 76 cm and has a net weight of approximately 47 kg.

What does the three-year warranty cover?

The limited warranty covers eligible manufacturing defects affecting approved machine components. Cartridges, normal wear, accidental damage, misuse and unauthorized modifications are excluded.

Does the machine come with CE and RoHS certificates?

Yes. The Wikbeauty 3-in-1 Machine comes with CE and RoHS certificates.

Expand Your Face and Body Treatment Services

The Wikbeauty 7D, 8D and Thermal Shaping 3-in-1 Machine combines three dedicated technologies within one professional platform:

1. 7D HIFU for facial firming

2. 8D HIFU for focused lifting protocols

3. Thermal Shaping for body contouring

Choose the appropriate voltage and contact Wikbeauty for current pricing, purchasing assistance and delivery information.

Request Pricing and Product Consultation

Professional Standing SMAS HIFU System

Blade Tip and Cannon Head Technology for Face and Body Treatments

The Wikbeauty Standing SMAS HIFU Machine is a professional face and body treatment platform combining two Blade Tip handles with one Cannon Head handle.

Seven Blade Tip cartridge depths, ranging from 1.5 mm to 13 mm, support facial skin firming, SMAS-focused lifting and deeper body-contouring protocols. The Cannon Head handle provides precise fixed-point energy delivery through 1.5 mm, 3.0 mm and 4.5 mm cartridges.

Its freestanding trolley design keeps the machine, handles and cables organized while allowing convenient movement within the treatment environment.

Three treatment handles | 1.5–13 mm depth range | Face and body applications | Three-year warranty

Two Complementary HIFU Handle Systems

Blade Tip Handles

The machine includes two Blade Tip handles for professional face and body HIFU treatments.

Available cartridge depths include:

• 1.5 mm

• 2.0 mm

• 3.0 mm

• 4.5 mm

• 6.0 mm

• 9.0 mm

• 13.0 mm

The broad depth range allows trained operators to select an appropriate cartridge for facial, neck or body applications.

Shallower cartridges support facial skin-firming protocols, while the deeper 6.0 mm, 9.0 mm and 13.0 mm cartridges are designed for appropriately selected body areas.

Cannon Head Handle

The Cannon Head handle provides fixed-point focused ultrasound delivery for more targeted facial treatments.

It includes:

• 1.5 mm cartridge

• 3.0 mm cartridge

• 4.5 mm cartridge

This handle is designed for controlled work on suitable areas of the face, jawline and neck where precise energy placement is required.

Seven Depth Options from 1.5 mm to 13 mm

Different facial and body areas require different treatment depths.

This table provides general application guidance. Cartridge depth must be selected according to client anatomy, tissue thickness, treatment area and professional training.

How SMAS HIFU Technology Works

HIFU stands for High-Intensity Focused Ultrasound.

The system delivers controlled ultrasound energy to a selected depth below the skin’s surface without creating a surgical incision. When correctly applied, the energy produces focused thermal points within the targeted tissue.

This controlled response supports the body’s natural collagen-remodeling process and may be incorporated into professional treatments focused on lifting, firming and contour refinement.

HIFU is an ultrasound-based technology and should not be described as a laser treatment.

Individual results vary according to age, skin condition, tissue thickness, treatment parameters and biological response.

Professional Face and Body Applications

A complete consultation and contraindication assessment must be performed before treatment.

Precision Face and Body Treatment Planning

Facial Skin Firming

The 1.5 mm, 2.0 mm and 3.0 mm cartridges support professional protocols for suitable superficial and mid-depth facial areas.

SMAS-Focused Lifting

The 4.5 mm cartridge is commonly incorporated into professional lifting protocols for appropriately selected areas of the lower face and neck.

Fixed-Point Facial Treatments

The Cannon Head handle provides controlled energy placement for detailed facial work using 1.5 mm, 3.0 mm and 4.5 mm cartridges.

Professional Body Contouring

The deeper 6.0 mm, 9.0 mm and 13.0 mm Blade Tip cartridges extend treatment possibilities to suitable areas of the abdomen, waist, arms and thighs.

Structured Treatment Programs

Qualified operators may create individual face or body treatment plans using the appropriate handle and cartridge. Each area must be assessed separately.

Freestanding Trolley Design

The integrated trolley configuration is designed for organized daily operation in a professional treatment environment.

Key design advantages include:

• Stable floor-standing construction

• Integrated rolling base

• Three dedicated handle positions

• Organized cable management

• Central digital control interface

• Convenient repositioning between treatment rooms

• Professional black-and-white appearance

• Compact all-in-one equipment arrangement

The machine weighs approximately 50 kg and should be moved carefully on level indoor surfaces.

How a Professional Treatment Session Works

1. Client Consultation

The operator reviews the client’s concerns, treatment goals, medical history, skin condition and contraindications.

2. Treatment Planning

The operator selects the Blade Tip or Cannon Head handle and chooses a suitable cartridge depth according to the treatment area.

3. Skin Preparation

The skin is cleansed and marked where required. Conductive gel or the recommended ultrasound coupling medium is applied.

4. Parameter Selection

The machine settings are adjusted according to the cartridge depth, treatment area, client condition and recommended protocol.

5. Controlled Energy Delivery

The selected handle is positioned correctly and focused ultrasound energy is delivered using the approved technique.

6. Client Monitoring

The operator monitors client comfort and tissue response throughout the session. Energy settings should be adjusted when necessary.

7. Post-Treatment Care

The treatment area is cleaned and the client receives appropriate aftercare guidance.

Temporary redness, swelling, sensitivity, tenderness, tingling or numbness may occur. Recovery experience varies between clients.

Technical Specifications

Electrical specifications should be confirmed according to the voltage selected for the final order.

What Is Included?

Main Equipment

• One standing SMAS HIFU trolley unit

• Two Blade Tip handles

• One Cannon Head handle

• Power cable suitable for the selected market

• Starter conductive gel

Blade Tip Cartridges

• 1.5 mm cartridge

• 2.0 mm cartridge

• 3.0 mm cartridge

• 4.5 mm cartridge

• 6.0 mm cartridge

• 9.0 mm cartridge

• 13.0 mm cartridge

Cannon Head Cartridges

• 1.5 mm cartridge

• 3.0 mm cartridge

• 4.5 mm cartridge

Documentation and Certification

• English user manual

• CE certificate

• RoHS certificate

• Installation guidance
  

• Treatment-protocol guidance

• Cleaning and maintenance instructions

• Basic troubleshooting assistance

Final cartridge quantities and package contents should be confirmed on the order quotation.

CE and RoHS Certified

The Wikbeauty Standing SMAS HIFU Machine comes with:

• CE Certificate

• RoHS Certificate

These certificates are included with the machine and support its professional positioning and international distribution.

Professional Training and Support

Wikbeauty provides remote training and operating guidance covering:

• Machine installation and setup

• Control-interface operation

• Blade Tip handle operation

• Cannon Head handle operation

• Cartridge installation and selection

• Basic parameter adjustment

• Facial and body treatment protocols

• Cleaning and routine maintenance

• HIFU safety procedures

• Basic troubleshooting

Training materials support equipment familiarization but do not replace professional anatomy training, qualifications or licenses required in the operator’s jurisdiction.

Three-Year Warranty

The Wikbeauty Standing SMAS HIFU Machine is supported by a three-year limited warranty, providing long-term protection for your equipment investment.

Warranty Coverage

Subject to the official warranty conditions, eligible manufacturing defects may be covered for:

• Main machine unit

• Internal electronic components

• Digital control system

• Original Blade Tip handles

• Original Cannon Head handle

• Handle connectors

• Other eligible original machine components

Cartridges and other limited-use components may have separate warranty conditions.

Technical Support Process

If a technical issue occurs, Wikbeauty will assist with:

1. Remote technical assessment

2. Guided diagnostic testing

3. Identification of the affected component

4. Confirmation of warranty eligibility

5. Replacement-part assistance where applicable

6. Remote installation guidance

Warranty Exclusions

The warranty does not normally cover:

• Accidental or cosmetic damage

• Incorrect operation or misuse

• Unauthorized repair or modification

• Incorrect voltage or electrical connection

• Improper cleaning or storage

• Damage caused by dropping a handle

• Normal cartridge depletion

• Incorrect cartridge installation

• Unauthorized transportation damage

• Failure to follow the operating manual

The order number, serial number, photographs and diagnostic videos may be required when requesting warranty service.

All coverage remains subject to Wikbeauty’s official warranty policy.

Safety and Contraindications

This system is professional aesthetic equipment and should only be operated by appropriately trained personnel.

A complete consultation and contraindication assessment must be completed before every treatment.

HIFU treatment may not be suitable for individuals with:

• Pregnancy or suspected pregnancy

• Implanted electronic devices

• Metallic implants in or near the treatment area

• Active cancer

• Serious cardiovascular conditions

• Blood-clotting disorders

• Uncontrolled medical conditions

• Active infection or inflammation

• Open wounds in the treatment area

• Severe skin conditions

• Conditions affecting normal healing

• Recent surgery in the proposed treatment area

• Recent injectable treatments in the area

• Other contraindications listed in the user manual

Focused energy must not be applied over the eyes, thyroid, major nerves, large blood vessels, bones or other prohibited anatomical structures.

This is not an exhaustive contraindication list. Operators must follow the supplied manual, professional training requirements and applicable local regulations. Medical guidance should be obtained when treatment suitability is uncertain.

Intended Professional Users

The Standing SMAS HIFU Machine is suitable for:

• Beauty salons

• Aesthetic clinics

• Medical spas

• Facial-rejuvenation studios

• Body-contouring centers

• Qualified independent practitioners

• Businesses expanding their face and body services

The system is not designed for casual or unsupervised home use.

Why Choose This Standing SMAS HIFU Machine?

Two Complementary Handle Designs

Blade Tip handles provide a wide facial and body depth range, while the Cannon Head handle supports precise fixed-point facial treatments.

Complete 1.5–13 mm Depth Range

Seven Blade Tip cartridge depths support professional treatments from superficial facial applications to deeper body-contouring protocols.

Three Dedicated Handles

Two Blade Tip handles and one Cannon Head handle provide greater operational flexibility.

Face and Body Applications

Offer facial lifting, skin firming, jawline contouring and professional body-contouring services from one platform.

Freestanding Professional Design

The integrated trolley keeps the console, handles and cabling organized while allowing convenient repositioning.

Professional Certifications

The machine comes with CE and RoHS certificates.

Long-Term Equipment Support

Remote training, technical assistance and a three-year limited warranty are included.

Frequently Asked Questions

What is the difference between the Blade Tip and Cannon Head handles?

The Blade Tip handles support cartridge depths from 1.5 mm to 13 mm for facial and body applications. The Cannon Head handle uses 1.5 mm, 3.0 mm and 4.5 mm cartridges for precise fixed-point facial treatments.

What do the different cartridge depths do?

Shallower cartridges support suitable facial applications. The 3.0 mm and 4.5 mm cartridges are used in professional facial and SMAS-focused protocols. The deeper 6.0 mm, 9.0 mm and 13.0 mm cartridges are designed for appropriately selected body areas.

Is HIFU a laser treatment?

No. HIFU uses focused ultrasound energy. It is not a laser technology.

Is treatment painful?

Client experience varies according to the treatment area, cartridge depth, energy setting and individual sensitivity. Warmth, tingling or temporary discomfort may occur.

Is there any downtime?

Recovery experience varies. Some clients may return to normal activities shortly after treatment, while temporary redness, swelling, tenderness, tingling or sensitivity may occur.

How many treatments will a client need?

Treatment frequency depends on the area, client condition and professional protocol. A fixed number of sessions or guaranteed result should not be promised.

How often can treatment be repeated?

Treatment intervals depend on the area treated, energy settings, client response and professional protocol. Sufficient time should be allowed for the tissue response before repeating treatment.

What are the machine’s dimensions and weight?

The machine measures approximately 59 × 70 × 152 cm and weighs approximately 50 kg.

What does the three-year warranty cover?

The limited warranty covers eligible manufacturing defects affecting approved machine components. Cartridges, normal wear, accidental damage, misuse and unauthorized modifications are excluded.

Does the machine come with CE and RoHS certificates?

Yes. The Wikbeauty Standing SMAS HIFU Machine comes with CE and RoHS certificates.

Expand Your Professional HIFU Services

The Wikbeauty Standing SMAS HIFU Machine combines:

1. Two Blade Tip handles for face and body applications

2. One Cannon Head handle for precise facial treatments

3. Seven Blade Tip cartridge depths from 1.5 mm to 13 mm

Contact Wikbeauty for current pricing, available voltage options, delivery information and purchasing assistance.

Request Pricing and Product Consultation

Professional Gold 4D HIFU 4-in-1 System

Four Dedicated Technologies for Facial Lifting, Skin Refinement and Body Contouring

The Wikbeauty Gold 4D HIFU 4-in-1 Machine combines four professional aesthetic treatment handles within one premium desktop platform.

The system includes a multi-line 4D HIFU handle, a Single-Point HIFU and RF handle, a Skin Knife handle and a Thermal Shaping handle. Together, they support professional services focused on facial lifting, skin firming, contour refinement and non-invasive body treatments.

A 15-inch intelligent touchscreen, multiple cartridge depths and pre-programmed protocols provide trained operators with greater treatment flexibility from one compact system.

Four dedicated handles | 1.5–13 mm depth range | 15-inch touchscreen | Three-year warranty

Four Professional Technologies in One Machine

Multi-Line 4D HIFU Handle

The 4D HIFU handle delivers multiple treatment lines with each activation, supporting more efficient coverage than a conventional single-line HIFU system.

It includes facial and body cartridges ranging from 1.5 mm to 9.0 mm.

Facial cartridges:

• 1.5 mm

• 2.0 mm

• 3.0 mm

• 4.5 mm

Body cartridges:

• 6.0 mm

• 9.0 mm

The available depths allow trained operators to create protocols for facial skin firming, jawline definition, neck treatments and suitable body areas.

Single-Point HIFU and RF Handle

The Single-Point handle combines focused ultrasound and radiofrequency delivery within a targeted treatment format.

Available cartridge depths include:

• 1.5 mm

• 3.0 mm

• 4.5 mm

• 9.0 mm

This handle is designed for controlled energy placement on appropriately selected facial or body areas.

The exact HIFU and RF parameters must be selected according to professional training, the treatment area and client suitability.

Skin Knife Handle

The Skin Knife handle uses blade-style cartridges designed to distribute energy across broader treatment areas.

Available depths include:

• 1.5 mm

• 2.0 mm

• 3.0 mm

• 4.5 mm

It can be incorporated into professional programs focused on skin firming, texture refinement and overall facial rejuvenation.

Despite its name, the Skin Knife handle is not a surgical blade and does not cut the skin.

Thermal Shaping Handle

The Thermal Shaping handle extends the machine’s applications to professional body-contouring treatments.

Available cartridge depths include:

• 8.0 mm

• 13.0 mm

These deeper cartridges are intended for appropriately selected areas with sufficient tissue depth, including the abdomen, waist, back, arms and thighs.

Multiple Delivery Formats for Customized Treatments

Each handle provides a different method of energy delivery.

Handle and cartridge selection must be based on client anatomy, tissue thickness, treatment goals and professional training.

Multi-Line HIFU for Efficient Coverage

The 4D HIFU handle is designed to deliver up to 12 treatment lines per activation, depending on the selected settings and cartridge.

Compared with a conventional single-line system, multi-line delivery may provide:

• More efficient treatment-area coverage

• More consistent line distribution

• Reduced repetitive handle repositioning

• Greater flexibility for larger facial areas

• More streamlined professional workflows

The supplied specifications indicate a cartridge capacity of up to 10,000 shots. Actual capacity depends on the cartridge and operating configuration.

Higher line output does not remove the need for correct spacing, safe energy selection and knowledge of facial anatomy.

Treatment Depths from 1.5 mm to 13 mm

This table provides general positioning information. The correct depth must be selected according to the treatment area, tissue thickness and approved professional protocol.

Professional Face and Body Applications

A complete client consultation and contraindication assessment must be performed before treatment.

How HIFU and RF Technologies Work

HIFU stands for High-Intensity Focused Ultrasound.

HIFU delivers controlled ultrasound energy to a defined depth below the skin’s surface. When applied correctly, the focused thermal points support the body’s natural tissue-remodeling and collagen-response processes.

Radiofrequency uses controlled electrical energy to generate heat within suitable tissue layers. The Single-Point handle combines HIFU and RF delivery for targeted professional protocols.

The Thermal Shaping handle uses deeper cartridge options for appropriately selected body areas.

Individual outcomes vary according to age, skin condition, tissue thickness, treatment settings and biological response.

Build a Complete Professional Service Menu

Multi-Line Facial HIFU

Use the 4D HIFU handle for structured facial lifting and firming treatments with efficient multi-line coverage.

Targeted HIFU and RF Treatments

The Single-Point handle supports focused protocols for suitable areas requiring precise energy placement.

Skin-Firming and Refinement Services

The Skin Knife handle provides broader energy delivery for professional skin-firming and texture-focused treatments.

Body-Contouring Services

The Thermal Shaping handle adds professional body treatments for appropriately selected areas such as the abdomen, waist, arms and thighs.

Combination Treatment Plans

Qualified operators may develop treatment plans using more than one handle when appropriate. Compatibility, sequence and treatment intervals must follow professional training and manufacturer protocols.

Premium Desktop Design

The gold desktop housing combines four technologies within a compact professional format.

Key design features include:

• Gold professional housing

• 15-inch intelligent color touchscreen

• Four dedicated treatment handles

• Multiple facial and body cartridges

• Pre-programmed operating protocols

• Adjustable energy and depth controls

• Automatic shut-off function

• AC 110–220 V compatibility

• Approximately 21 kg net weight

The machine should be installed on a stable, level treatment trolley or work surface with sufficient ventilation.

How a Professional Treatment Session Works

1. Consultation and Assessment

The operator reviews the client’s concerns, treatment goals, medical history, skin condition, tissue thickness and contraindications.

2. Handle Selection

The appropriate treatment handle is selected according to whether the protocol focuses on lifting, targeted energy delivery, skin refinement or body contouring.

3. Cartridge Selection

The cartridge depth is selected according to the treatment area and client anatomy.

4. Treatment Preparation

The treatment area is cleansed and marked where required. Conductive gel or the recommended coupling material is applied.

5. Parameter Selection

Energy, depth, delivery mode and other available settings are adjusted according to the selected protocol.

6. Controlled Treatment

The operator delivers energy using the correct technique while monitoring client comfort and tissue response.

7. Post-Treatment Care

The area is cleaned and the client receives appropriate aftercare instructions.

Temporary redness, swelling, sensitivity, tenderness, tingling or numbness may occur. Recovery experience varies according to the technology and individual response.

Technical Specifications

Specifications may be updated according to the final production configuration.

What Is Included?

Main Equipment

• One Gold 4D HIFU 4-in-1 touchscreen console

• One Multi-Line 4D HIFU handle

• One Single-Point HIFU and RF handle

• One Skin Knife handle

• One Thermal Shaping handle

• Power cable suitable for the selected market

• Starter conductive gel

Multi-Line 4D HIFU Cartridges

• 1.5 mm

• 2.0 mm

• 3.0 mm

• 4.5 mm

• 6.0 mm

• 9.0 mm

Single-Point HIFU and RF Cartridges

• 1.5 mm

• 3.0 mm

• 4.5 mm

• 9.0 mm

Skin Knife Cartridges

• 1.5 mm

• 2.0 mm

• 3.0 mm

• 4.5 mm

Thermal Shaping Cartridges

• 8.0 mm

• 13.0 mm

Documentation and Certification

• English user manual

• CE certificate

• RoHS certificate

• Setup guidance
  

• Treatment-protocol guidance

• Cleaning and maintenance instructions

• Basic troubleshooting assistance

Final cartridge quantities and package contents should be confirmed on the order quotation.

CE and RoHS Certified

The Wikbeauty Gold 4D HIFU 4-in-1 Machine comes with:

• CE Certificate

• RoHS Certificate

These certificates are included with the machine and support its professional positioning and international distribution.

Professional Training and Support

Wikbeauty provides remote training and operating guidance covering:

• Machine installation and setup

• Touchscreen operation

• Handle and cartridge installation

• Multi-Line HIFU operation

• Single-Point HIFU and RF operation

• Skin Knife operation

• Thermal Shaping operation

• Basic treatment-parameter selection

• Facial and body protocols

• Cleaning and routine maintenance

• Safety procedures

• Basic troubleshooting

Training materials support equipment familiarization but do not replace anatomy training, professional qualifications or licenses required in the operator’s jurisdiction.

Three-Year Warranty

The Wikbeauty Gold 4D HIFU 4-in-1 Machine is supported by a three-year limited warranty covering eligible parts and labor.

Warranty Coverage

Subject to the official warranty conditions, coverage may include eligible manufacturing defects affecting:

• Main machine unit

• Internal electronic components

• Touchscreen and control system

• Original treatment handles

• Handle connectors

• Other eligible original machine components

• Eligible repair labor during the warranty period

Cartridges and other limited-use components may have separate warranty conditions.

Technical Support Process

If a technical issue occurs, Wikbeauty will assist with:

1. Remote technical assessment

2. Guided diagnostic testing

3. Identification of the affected component

4. Confirmation of warranty eligibility

5. Replacement-part or repair assistance where applicable

6. Remote installation guidance

Warranty Exclusions

The warranty does not normally cover:

• Accidental or cosmetic damage

• Incorrect operation or misuse

• Unauthorized repair or modification

• Incorrect voltage or electrical connection

• Improper cleaning or storage

• Damage caused by dropping a handle

• Normal cartridge depletion

• Incorrect cartridge installation

• Unauthorized transportation damage

• Failure to follow the operating manual

Order information, the machine serial number, photographs and diagnostic videos may be required when requesting warranty service.

All coverage remains subject to Wikbeauty’s official warranty policy.

Safety and Contraindications

This system is professional aesthetic equipment and should only be operated by appropriately trained personnel.

A complete consultation and contraindication assessment must be completed before every treatment.

Treatment may not be suitable for individuals with:

• Pregnancy or suspected pregnancy

• Implanted electronic devices

• Metallic implants in or near the treatment area

• Active cancer

• Serious cardiovascular conditions

• Blood-clotting disorders

• Uncontrolled medical conditions

• Active infection or inflammation

• Open wounds in the treatment area

• Severe skin disorders

• Conditions affecting normal healing

• Recent surgery in the treatment area

• Recent injectable treatments

• Other contraindications listed in the operating manual

Energy must not be applied over the eyes, thyroid, major nerves, large blood vessels, bones or other prohibited anatomical structures.

This is not an exhaustive contraindication list. Operators must follow the supplied manual, professional training requirements and applicable local regulations. Medical guidance should be obtained when treatment suitability is uncertain.

Intended Professional Users

The Gold 4D HIFU 4-in-1 Machine is suitable for:

• Beauty salons

• Aesthetic clinics

• Medical spas

• Facial-rejuvenation studios

• Body-contouring centers

• Qualified independent practitioners

• Businesses expanding their face and body services

The system is not intended for casual or unsupervised home use.

Why Choose the Gold 4D HIFU 4-in-1 Machine?

Four Dedicated Technologies

Combine multi-line HIFU, targeted HIFU and RF, Skin Knife treatments and Thermal Shaping within one professional platform.

Efficient Multi-Line Delivery

The 4D HIFU handle can deliver up to 12 treatment lines per activation for more efficient coverage.

Complete Face and Body Depth Range

Cartridge options extend from 1.5 mm for superficial facial applications to 13 mm for deeper body protocols.

Premium Desktop Design

The gold housing and 15-inch touchscreen create a refined presentation in a professional treatment room.

Professional Certifications

The machine comes with CE and RoHS certificates.

Long-Term Equipment Support

Remote training, technical assistance and a three-year limited warranty covering eligible parts and labor are included.

Frequently Asked Questions

What does “4-in-1” mean?

The system combines four dedicated technologies: Multi-Line 4D HIFU, Single-Point HIFU and RF, Skin Knife and Thermal Shaping.

How is 4D HIFU different from conventional single-line HIFU?

The 4D handle can deliver multiple treatment lines per activation. This provides more efficient coverage than repeatedly delivering one line at a time.

What does the Single-Point HIFU and RF handle do?

It combines targeted focused ultrasound and radiofrequency delivery for precise professional protocols. Settings and treatment placement must follow the supplied training.

Does the Skin Knife cut the skin?

No. “Skin Knife” is the name used for its blade-style treatment cartridge. It is not a surgical blade and does not cut the skin.

What is the Thermal Shaping handle used for?

The Thermal Shaping handle includes 8.0 mm and 13.0 mm cartridges for professional body-contouring treatments on appropriately selected areas.

Is treatment painful?

Client experience varies according to the technology, area, cartridge depth and energy setting. Warmth, tingling, tenderness or temporary discomfort may occur.

Is there any downtime?

Recovery experience varies. Some clients may return to normal activities shortly after treatment, while temporary redness, swelling, tenderness or sensitivity may occur.

How many sessions will a client need?

Treatment frequency depends on the technology, treatment area, client condition and professional protocol. A fixed number of sessions or guaranteed outcome should not be promised.

What does the three-year warranty cover?

The limited warranty covers eligible manufacturing defects affecting approved machine components and eligible repair labor. Cartridges, normal wear, accidental damage, misuse and unauthorized modifications are excluded.

Does the machine come with CE and RoHS certificates?

Yes. The Wikbeauty Gold 4D HIFU 4-in-1 Machine comes with CE and RoHS certificates.

Expand Your Face and Body Treatment Services

The Wikbeauty Gold 4D HIFU 4-in-1 Machine brings four complementary treatment technologies into one premium desktop platform:

1. Multi-Line 4D HIFU

2. Single-Point HIFU and RF

3. Skin Knife

4. Thermal Shaping

Contact Wikbeauty for current pricing, voltage selection, delivery information and purchasing assistance.

Request Pricing and Product Consultation

Professional Vertical 3-in-1 RF Microneedling and Ultrasound System

Three Dedicated Technologies for Face, Body and Intimate-Care Applications

The Wikbeauty Vertical 3-in-1 Gold RF Microneedling and 7D Ultrasound Machine combines three professional aesthetic technologies within one floor-standing system.

It includes a Gold RF Microneedling handle, a 7D Focused Ultrasound handle and a 360° Intimate Ultrasound handle. Together, these technologies support professional treatment programs focused on facial rejuvenation, skin-texture refinement, lifting, body contouring and intimate care.

The vertical design provides organized handle storage and a compact professional footprint for beauty salons, med spas and aesthetic clinics.

Three dedicated technologies | Face, body and intimate care | Adjustable treatment depths | Three-year warranty

Three Professional Technologies in One System

Gold RF Microneedling

The Gold RF Microneedling handle combines adjustable microneedle penetration with controlled bipolar radiofrequency energy.

The needles enter the skin at a selected depth while RF energy is delivered to the targeted tissue. This controlled process can be incorporated into professional treatments focused on collagen remodeling and skin rejuvenation.

The microneedling depth is adjustable from 0.5 mm to 3.5 mm.

Common applications include:

• Improvement in skin texture

• Appearance of enlarged pores

• Fine-line treatments

• Uneven-looking skin tone

• Acne-scar appearance

• Facial and body skin firming

• General skin-rejuvenation programs

RF microneedling is a minimally invasive treatment and requires appropriate hygiene, infection-control and aftercare procedures.

7D Focused Ultrasound

The 7D handle delivers focused ultrasound energy at selectable depths for professional face and body treatments.

It includes four cartridge depths:

• 1.5 mm

• 3.0 mm

• 4.5 mm

• 9.0 mm

The shallower cartridges support facial skin-firming and lifting protocols, while the 9.0 mm cartridge is intended for appropriately selected body areas.

360° Intimate Ultrasound

The dedicated Intimate Ultrasound handle delivers focused ultrasound energy in a 360° treatment pattern.

It includes:

• 3.0 mm cartridge

• 4.5 mm cartridge

The handle is designed for specialized professional intimate-care protocols where legally permitted.

Intimate treatments must only be performed by appropriately qualified professionals following strict consultation, informed-consent, privacy, hygiene and safety procedures.

Four RF Microneedling Tip Options

The RF Microneedling handle includes four tip configurations for different treatment areas and professional protocols.

The Nano tip does not penetrate the skin in the same way as the microneedle cartridges. The 10-pin, 25-pin and 64-pin tips contain needles and must follow professional infection-control requirements.

Tip selection should be based on the treatment area, client condition and intended protocol.

Vacuum-Assisted RF Microneedling Operation

The RF Microneedling handle includes a vacuum-assisted contact system designed to support stable placement during treatment.

Professional operating features include:

• Adjustable needle depth from 0.5–3.5 mm

• Manual operating mode

• Automatic operating mode

• Vacuum-assisted skin contact

• Automatic needle-release function

• Interchangeable treatment tips

• Adjustable RF treatment parameters

The vacuum feature supports consistent contact but does not replace correct handpiece positioning, professional judgment or client monitoring.

Face, Body and Intimate-Care Applications

Treatment suitability and expected outcomes vary between clients. A complete consultation and contraindication assessment must be performed before treatment.

How the Technologies Work

Radiofrequency Microneedling

Insulated microneedles penetrate to a controlled depth and deliver RF energy within the selected tissue layer.

This creates a controlled treatment response intended to support collagen remodeling and improvement in the appearance of skin texture.

Focused Ultrasound

The 7D and Intimate Care handles deliver focused ultrasound energy at a selected depth below the surface.

When applied correctly, focused thermal points support the body’s natural tissue-remodeling response without creating a surgical incision.

Individual results vary according to age, skin condition, tissue thickness, treatment parameters and biological response.

Build a Complete Professional Treatment Menu

Facial Lifting and Firming

The 7D Ultrasound handle supports professional protocols for the face, jawline and neck using 1.5 mm, 3.0 mm and 4.5 mm cartridges.

Advanced Skin Rejuvenation

The RF Microneedling handle supports customizable treatments focused on texture, pores, fine lines and general skin quality.

Body Firming and Contouring

The 9.0 mm 7D cartridge and suitable RF Microneedling tips expand the treatment menu to appropriately selected body areas.

Intimate Wellness Services

The 360° Intimate Ultrasound handle enables qualified operators to add specialized intimate-care services where legally permitted.

Combination Treatment Planning

Qualified professionals may develop treatment plans using more than one technology where appropriate. Treatment sequence, intervals and compatibility must follow professional training and manufacturer protocols.

How a Professional Treatment Session Works

1. Consultation and Assessment

The operator reviews the client’s concerns, treatment goals, medical history, skin condition and contraindications.

Additional informed-consent and privacy procedures are required for intimate treatments.

2. Technology Selection

The RF Microneedling, 7D Ultrasound or Intimate Ultrasound handle is selected according to the intended treatment.

3. Tip or Cartridge Selection

The operator selects the appropriate needle tip, Nano tip or ultrasound cartridge.

4. Treatment Preparation

The treatment area is cleansed and prepared according to the selected technology. Appropriate disinfection and sterile supplies are required for microneedling.

5. Parameter Selection

Needle depth, RF energy, ultrasound depth and other available settings are adjusted according to the professional protocol.

6. Controlled Treatment

The treatment is performed using correct positioning and technique. Client comfort and tissue response are monitored throughout the procedure.

7. Post-Treatment Care

The area is cleaned and suitable aftercare instructions are provided.

RF microneedling may cause temporary redness, swelling, sensitivity, pinpoint bleeding or mild crusting. Ultrasound treatments may cause temporary redness, tenderness, tingling or swelling.

Recovery experience varies between clients.

Technical Specifications

Specifications may be updated according to the final production configuration.

What Is Included?

Main Equipment

• One vertical 3-in-1 control unit

• One Gold RF Microneedling handle

• One 7D Focused Ultrasound handle

• One 360° Intimate Ultrasound handle

• Power cable suitable for the selected market

7D Ultrasound Cartridges

• 1.5 mm

• 3.0 mm

• 4.5 mm

• 9.0 mm

Intimate Ultrasound Cartridges

• 3.0 mm

• 4.5 mm

RF Microneedling Tips

• Nano tip

• 10-pin tip

• 25-pin tip

• 64-pin tip

Documentation and Certification

• English user manual

• CE certificate

• RoHS certificate

• Installation and setup guidance
  

• Treatment-protocol guidance

• Cleaning and maintenance instructions

• Basic troubleshooting assistance

Final tip quantities and package contents should be confirmed on the order quotation.

CE and RoHS Certified

The Wikbeauty Vertical 3-in-1 RF Microneedling and Ultrasound Machine comes with:

• CE Certificate

• RoHS Certificate

These certificates are included with the machine and support its professional positioning and international distribution.

Professional Training and Support

Wikbeauty provides remote training and operating guidance covering:

• Machine installation and setup

• Digital control operation

• RF Microneedling handle operation

• 7D Ultrasound handle operation

• Intimate Ultrasound handle operation

• Needle-tip and cartridge installation

• Basic treatment-parameter selection

• Hygiene and infection-control procedures

• Facial, body and intimate-care protocols

• Cleaning and routine maintenance

• Basic troubleshooting

Training materials support equipment familiarization but do not replace professional qualifications, anatomy training, intimate-care training or licenses required in the operator’s jurisdiction.

Three-Year Warranty

The Wikbeauty Vertical 3-in-1 System is supported by a three-year limited warranty covering eligible parts and labor.

Warranty Coverage

Subject to the official warranty conditions, coverage may include eligible manufacturing defects affecting:

• Main machine unit

• Internal electronic components

• Digital display and control system

• Original treatment handles

• Vacuum system

• Handle connectors

• Other eligible original components

• Eligible repair labor during the warranty period

Microneedling tips, ultrasound cartridges and other limited-use components may have separate warranty conditions.

Technical Support Process

If a technical issue occurs, Wikbeauty will assist with:

1. Remote technical assessment

2. Guided diagnostic testing

3. Identification of the affected component

4. Confirmation of warranty eligibility

5. Replacement-part or repair assistance where applicable

6. Remote installation guidance

Warranty Exclusions

The warranty does not normally cover:

• Accidental or cosmetic damage

• Incorrect operation or misuse

• Unauthorized repair or modification

• Incorrect voltage or electrical connection

• Improper cleaning, disinfection or storage

• Damage caused by dropping a handle

• Normal depletion of cartridges or tips

• Reuse of single-use microneedling components

• Unauthorized transportation damage

• Failure to follow the operating manual

Order information, the machine serial number, photographs and diagnostic videos may be required when requesting warranty service.

All coverage remains subject to Wikbeauty’s official warranty policy.

Safety and Contraindications

This system is professional aesthetic equipment and should only be operated by appropriately trained personnel.

A complete consultation, informed-consent process and contraindication assessment must be completed before every treatment.

Depending on the selected technology, treatment may not be suitable for individuals with:

• Pregnancy or suspected pregnancy

• Implanted electronic devices

• Metallic implants in or near the treatment area

• Active cancer

• Serious cardiovascular conditions

• Blood-clotting disorders

• Uncontrolled medical conditions

• Active infection or inflammation

• Open wounds

• Severe skin conditions

• Conditions affecting normal healing

• Recent surgery in the treatment area

• Recent injectable treatments

• Use of medications that affect healing or bleeding

• Other contraindications listed in the operating manual

RF Microneedling Safety

RF microneedling must be performed using appropriate hygiene and infection-control procedures. Single-use needle tips must not be reused.

Intimate-Care Safety

Intimate treatments require appropriate professional training, privacy safeguards, informed consent and strict hygiene controls.

Operators must confirm that intimate treatment is permitted within their professional scope and applicable local regulations.

This is not an exhaustive contraindication list. Medical guidance should be obtained whenever treatment suitability is uncertain.

Intended Professional Users

The Vertical 3-in-1 System is suitable for:

• Aesthetic clinics

• Medical spas

• Beauty salons

• Skin-rejuvenation studios

• Body-contouring centers

• Qualified intimate-care providers

• Appropriately trained independent practitioners

The machine is not designed for casual or unsupervised home use.

Why Choose This 3-in-1 System?

Three Complementary Technologies

Combine RF Microneedling, 7D Focused Ultrasound and 360° Intimate Ultrasound within one professional platform.

Face, Body and Intimate-Care Applications

Develop multiple professional service categories without purchasing three separate control units.

Adjustable RF Microneedling Depth

Select a needle depth from 0.5–3.5 mm according to the treatment area and professional protocol.

Four Microneedling Tip Options

Nano, 10-pin, 25-pin and 64-pin options support different areas and treatment objectives.

Vacuum-Assisted Operation

The vacuum sensor and automatic needle-release function support stable contact and controlled operation.

Professional Certifications

The machine comes with CE and RoHS certificates.

Long-Term Equipment Support

Remote training, technical assistance and a three-year limited warranty covering eligible parts and labor are included.

Frequently Asked Questions

What does “3-in-1” mean?

The machine combines Gold RF Microneedling, 7D Focused Ultrasound and 360° Intimate Ultrasound. Each technology has its own dedicated treatment handle.

Is RF microneedling non-invasive?

No. RF microneedling is minimally invasive because the needles penetrate the skin. Appropriate disinfection, single-use components and post-treatment care are required.

What is the difference between the RF Microneedling tips?

The Nano tip supports superficial skin-contact protocols. The 10-pin tip provides precise treatment of smaller areas, while the 25-pin and 64-pin tips provide progressively broader coverage.

What do the 7D Ultrasound cartridge depths treat?

The 1.5 mm, 3.0 mm and 4.5 mm cartridges support professional facial and neck protocols. The 9.0 mm cartridge is intended for appropriately selected body areas.

What is the Intimate Ultrasound handle used for?

It is designed for specialized professional intimate-care protocols using 3.0 mm and 4.5 mm cartridges. It must only be operated by appropriately qualified professionals where legally permitted.

Is intimate ultrasound safe?

Safety depends on client selection, operator training, correct parameters, hygiene and adherence to contraindications. It should not be described as risk-free or universally suitable.

Is treatment painful?

Client experience varies. RF microneedling may cause discomfort, while ultrasound treatments may produce warmth, tingling or tenderness.

Is there any downtime?

Recovery depends on the technology and individual response. RF microneedling may cause temporary redness, swelling or pinpoint crusting. Ultrasound treatments may cause temporary tenderness or swelling.

How many sessions will a client need?

Treatment frequency depends on the technology, area, client condition and protocol. A fixed number of sessions or guaranteed outcome should not be promised.

What does the three-year warranty cover?

The limited warranty covers eligible manufacturing defects affecting approved machine components and eligible repair labor. Tips, cartridges, normal wear, accidental damage and misuse are excluded.

Does the machine come with CE and RoHS certificates?

Yes. The Wikbeauty Vertical 3-in-1 Machine comes with CE and RoHS certificates.

Expand Your Face, Body and Intimate-Care Services

The Wikbeauty Vertical 3-in-1 System combines three professional technologies within one floor-standing platform:

1. Gold RF Microneedling

2. 7D Focused Ultrasound

3. 360° Intimate Ultrasound

Contact Wikbeauty for current pricing, voltage selection, delivery information and purchasing assistance.

Request Pricing and Product Consultation

Professional RF Thermal Face-Lifting System

Dual-Handle Technology with Three Treatment Depths

The Wikbeauty Thermal Face Lift Machine is a professional radiofrequency thermal-treatment system developed for facial firming, contour refinement and skin-rejuvenation services.

Two dedicated treatment handles—the Dual-Bo Blade and Cannon Head—provide different energy-delivery formats for detailed facial work and focused treatment applications.

Three interchangeable probes at 1.5 mm, 3.0 mm and 4.5 mm allow trained operators to select an appropriate treatment depth for different facial areas and professional protocols.

Its compact 19 kg desktop design is suitable for aesthetic clinics, medical spas, beauty salons and qualified independent practitioners.

Two professional handles | Three probe depths | 19 kg desktop design | Three-year warranty

Two Complementary Treatment Handles

Dual-Bo Blade Handle

The Dual-Bo Blade handle is designed for controlled energy delivery across appropriate facial areas.

Its blade-style treatment format supports professional protocols focused on:

• Facial skin firming

• Fine-line appearance

• Skin-texture refinement

• Lower-face contouring

• Suitable areas around the forehead and cheeks

Despite its name, the Blade handle is not a surgical instrument and does not cut the skin.

Cannon Head Handle

The Cannon Head handle provides focused-point energy placement for areas requiring a more targeted treatment approach.

It may be incorporated into professional protocols for:

• Jawline definition

• Lower-face firming

• Neck contour refinement

• Targeted facial areas

• Deeper treatment protocols

The correct handle should be selected according to the treatment area, tissue condition and operator training.

Three Probe Depths for Customized Treatments

P1.5 mm — Superficial Facial Protocols

The 1.5 mm probe is intended for controlled treatment of suitable superficial facial areas.

Common applications include:

• Fine-line appearance

• Skin-texture refinement

• Appearance of enlarged pores

• Superficial skin-firming protocols

• Maintenance treatments

Extra caution is required when working near delicate facial structures. Energy must not be applied directly over the eyes or eyelids.

P3.0 mm — Mid-Depth Treatment

The 3.0 mm probe supports professional protocols targeting deeper facial tissue than the 1.5 mm option.

Common applications include:

• Facial skin firming

• Appearance of moderate lines

• Cheek treatments

• Lower-face contour refinement

• General facial rejuvenation

P4.5 mm — Deeper Facial Protocols

The 4.5 mm probe is designed for deeper treatment applications on appropriately selected areas.

It may be incorporated into protocols focused on:

• Lower-face lifting

• Jawline definition

• Neck firming

• Contour refinement

• Suitable areas with sufficient tissue depth

Probe depth must always be selected according to facial anatomy, tissue thickness and professional treatment guidelines.

Professional Facial Applications

Individual outcomes vary according to age, skin condition, tissue thickness, treatment settings and biological response.

How RF Thermal Technology Works

Radiofrequency technology uses controlled electrical energy to generate heat within selected tissue layers.

When applied correctly, this controlled thermal response supports collagen remodeling and may improve the appearance of skin firmness, texture and facial contours over time.

The operator selects the treatment handle, probe depth and available parameters according to the treatment area and client assessment.

The system is intended for aesthetic skin-firming and contour-refinement treatments. It should not be marketed as permanently removing wrinkles, eliminating fat or producing a surgical facelift.

Manufacturer-Reported Evaluation Data

The supplied product information lists the following evaluation results:

These figures should be described as manufacturer-reported evaluation data.

Build a Professional Facial Treatment Menu

Full-Face Firming

Combine appropriate probe depths to develop a structured treatment for suitable areas of the forehead, cheeks and lower face.

Jawline and Lower-Face Contouring

Use the appropriate handle and deeper probe option for clients concerned with lower-face definition and visible skin laxity.

Fine-Line and Texture Treatments

The shallower probe can support protocols focused on suitable superficial areas and overall skin-texture appearance.

Neck-Firming Treatments

Develop targeted neck protocols following careful anatomical assessment and contraindication screening.

Maintenance Treatments

Suitable clients may receive periodic treatments according to their individual response and professional treatment plan.

Compact Professional Desktop Design

At approximately 19 kg, the machine combines professional operation with a relatively compact desktop format.

Key design features include:

• Two dedicated thermal-treatment handles

• Three interchangeable probe depths

• Durable ABS machine housing

• Compact desktop installation

• Organized professional setup

• Suitable for dedicated treatment rooms

• Easier repositioning than a large floor-standing system

The machine should be placed on a stable, level treatment trolley or work surface with adequate ventilation.

How a Professional Treatment Session Works

1. Client Consultation

The operator reviews the client’s concerns, medical history, skin condition, previous aesthetic procedures and contraindications.

2. Handle Selection

The Dual-Bo Blade or Cannon Head handle is selected according to the intended treatment technique.

3. Probe Selection

The 1.5 mm, 3.0 mm or 4.5 mm probe is selected according to the treatment area and tissue depth.

4. Skin Preparation

The treatment area is cleansed and marked where necessary. The recommended coupling medium is applied when required.

5. Parameter Selection

Energy and other available settings are adjusted according to the client’s condition, treatment area and professional protocol.

6. Controlled Treatment

The operator applies the selected handle using correct placement and technique while monitoring client comfort and tissue response.

7. Post-Treatment Care

The treatment area is cleaned and the client receives appropriate aftercare guidance.

Temporary redness, warmth, swelling, tenderness or sensitivity may occur. Recovery experience varies between clients.

Technical Specifications

Only certifications actually supplied with this exact model should be listed on the final product page.

What Is Included?

Main Equipment

• One Thermal Face Lift desktop console

• One Dual-Bo Blade handle

• One Cannon Head handle

• Power cable suitable for the selected market

• Starter treatment consumables, where applicable

Treatment Probes

• One P1.5 mm probe

• One P3.0 mm probe

• One P4.5 mm probe

Documentation and Training

• English user manual

• Installation and setup guidance
  

• Treatment-protocol guidance

• Cleaning and maintenance instructions

• Basic troubleshooting assistance

• Training certificate upon completion

Final package contents should be confirmed on the order quotation.

Professional Training and Support

Wikbeauty provides operating guidance covering:

• Machine installation and setup

• Dual-Bo Blade handle operation

• Cannon Head handle operation

• Probe installation and selection

• Basic treatment-parameter adjustment

• Facial and neck treatment protocols

• Client consultation and screening

• Cleaning and routine maintenance

• Safety procedures

• Basic troubleshooting

A training certificate is provided after completing the supplied equipment training.

Training supports machine familiarization but does not replace anatomy training, professional qualifications or licenses required in the operator’s jurisdiction.

Three-Year Professional Warranty

The Wikbeauty Thermal Face Lift Machine is supported by a three-year limited professional warranty.

Warranty Coverage

Subject to the official warranty conditions, eligible manufacturing defects may be covered for:

• Main machine unit

• Internal electronic components

• Control system

• Original Dual-Bo Blade handle

• Original Cannon Head handle

• Handle connectors

• Other eligible original components

Probes and other limited-use components may have separate warranty conditions.

Technical Support Process

If a technical issue occurs, Wikbeauty will assist with:

1. Remote technical assessment

2. Guided diagnostic testing

3. Identification of the affected component

4. Confirmation of warranty eligibility

5. Replacement-part or repair assistance where applicable

6. Remote installation guidance

Warranty Exclusions

The warranty does not normally cover:

• Accidental or cosmetic damage

• Incorrect operation or misuse

• Unauthorized repair or modification

• Incorrect voltage or electrical connection

• Improper cleaning or storage

• Damage caused by dropping a handle

• Normal probe depletion or wear

• Incorrect probe installation

• Unauthorized transportation damage

• Failure to follow the operating manual

Order information, the machine serial number, photographs and diagnostic videos may be required when requesting warranty support.

All coverage remains subject to Wikbeauty’s official warranty policy.

Safety and Contraindications

This machine is professional aesthetic equipment and should only be operated by appropriately trained personnel.

A complete consultation and contraindication assessment must be performed before every treatment.

Treatment may not be appropriate for individuals with:

• Pregnancy or suspected pregnancy

• Implanted electronic devices

• Metallic implants in or near the treatment area

• Active cancer

• Serious cardiovascular conditions

• Blood-clotting disorders

• Uncontrolled medical conditions

• Active infection or inflammation

• Open wounds in the treatment area

• Severe skin conditions

• Conditions affecting normal healing

• Recent surgery in the proposed treatment area

• Recent injectable treatments

• Other contraindications listed in the operating manual

Energy must not be applied directly over the eyes, thyroid, major nerves, large blood vessels, bones or other prohibited anatomical structures.

This is not an exhaustive contraindication list. Operators must follow the user manual, professional training requirements and applicable local regulations. Medical guidance should be obtained whenever treatment suitability is uncertain.

Intended Professional Users

The Thermal Face Lift Machine is suitable for:

• Aesthetic clinics

• Medical spas

• Beauty salons

• Facial-rejuvenation studios

• Qualified independent practitioners

• Businesses expanding their facial treatment services

Although the machine has a compact desktop design, it is not intended for casual or unsupervised home use.

Why Choose the Wikbeauty Thermal Face Lift Machine?

Two Dedicated Treatment Handles

The Dual-Bo Blade and Cannon Head provide complementary energy-delivery formats for different facial zones.

Three Treatment Depths

The 1.5 mm, 3.0 mm and 4.5 mm probes support customized professional protocols.

Face and Neck Applications

Develop treatments for facial firming, jawline definition, texture refinement and suitable neck areas.

Manufacturer-Reported Evaluation Data

The supplied assessment figures provide reference information for pore appearance, jawline, brightness, firmness and fine-line outcomes.

Compact Desktop Design

The approximately 19 kg system is easier to position than a large floor-standing platform.

Professional Training Included

Remote operating guidance and a training certificate are included.

Long-Term Equipment Support

Technical assistance and a three-year limited professional warranty support your equipment investment.

Frequently Asked Questions

What is the difference between the two handles?

The Dual-Bo Blade handle provides a broader blade-style treatment format. The Cannon Head handle supports more focused-point energy delivery for targeted areas.

What do the three probe depths do?

The 1.5 mm probe supports superficial facial protocols, the 3.0 mm probe supports mid-depth treatments, and the 4.5 mm probe is intended for deeper facial applications on appropriately selected areas.

Are the published percentages clinically verified?

The percentages supplied with the product should be described as manufacturer-reported evaluation data unless a complete independent clinical study is available.

Is this machine suitable for the eye area?

Only appropriate areas around the eyes may be treated by a trained professional using the correct probe and parameters. Energy must never be applied directly over the eye or eyelid.

How long does a treatment take?

Treatment time depends on the selected area, handle and protocol. A targeted treatment may be shorter than a complete facial session.

Are results immediate?

Some clients may notice an early firming response, while collagen-remodeling effects may develop progressively. Timing and results vary between individuals.

Is treatment completely painless?

No treatment experience is identical. Clients may feel warmth, tingling, tenderness or temporary discomfort depending on the area and energy setting.

Is there any downtime?

Some clients may resume normal activities shortly after treatment. Temporary redness, warmth, swelling or sensitivity may occur.

Is the machine safe for every skin type?

Suitability depends on the client’s skin condition, medical history, treatment area and selected parameters. A consultation and contraindication assessment are required.

Is this a home-use machine?

No. This is professional aesthetic equipment intended for trained operators.

What does the three-year warranty cover?

The limited warranty covers eligible manufacturing defects affecting approved machine components. Probes, normal wear, accidental damage, misuse and unauthorized modifications are excluded.

Upgrade Your Professional Facial Treatment Services

The Wikbeauty Thermal Face Lift Machine combines:

1. Dual-Bo Blade treatment technology

2. Cannon Head focused treatment technology

3. Three probe depths from 1.5 mm to 4.5 mm

Contact Wikbeauty for current pricing, voltage selection, delivery information and purchasing assistance.

Request Pricing and Product Consultation

Professional Portable HIFU Facial System

Three Cartridge Depths for Facial Firming and Contour Refinement

The Wikbeauty Portable HIFU Anti-Aging Machine is a professional focused-ultrasound system developed for non-surgical facial and neck treatments.

Three interchangeable cartridge depths—1.5 mm, 3.0 mm and 4.5 mm—allow trained operators to create structured protocols for different facial tissue layers and approved treatment areas.

A large 19-inch display provides access to treatment controls, parameter settings and facial-area guidance. Its floor-standing design, metal chassis and approximately 25 kg weight make it more compact than many full-size professional HIFU platforms.

Three cartridge depths | 19-inch display | 180 W rated power | Three-year warranty

Three Professional Cartridge Depths

1.5 mm — Superficial Facial Applications

The 1.5 mm cartridge is intended for suitable superficial facial areas.

Potential professional applications include:

• Superficial skin-firming protocols

• Fine-line appearance

• Skin-texture refinement

• Selected areas of the forehead and cheeks

• Maintenance-oriented treatments

The 1.5 mm cartridge should not be marketed as permanently shrinking pores or removing wrinkles.

3.0 mm — Mid-Depth Facial Applications

The 3.0 mm cartridge supports professionally planned treatment within suitable mid-depth facial and neck tissue.

Potential applications include:

• Facial skin firming

• Cheek treatments

• Lower-face contour refinement

• Suitable neck areas

• Improvement in the appearance of skin laxity

4.5 mm — Deeper Facial Applications

The 4.5 mm cartridge is designed for appropriately selected deeper facial areas.

Potential applications include:

• Lower-face firming

• Jawline definition

• Submental-area protocols

• Suitable neck treatments

• Deeper facial contour-refinement programs

The 4.5 mm cartridge does not build or tighten muscle like an exercise device. Focused ultrasound creates controlled focal effects within selected tissue.

How Focused Ultrasound Works

The machine delivers ultrasound energy to a defined focal depth beneath the skin’s surface.

At the focal point, the energy creates controlled thermal and mechanical effects. When delivered correctly, this response may support gradual tissue remodeling and improvement in the appearance of skin firmness.

HIFU does not:

• Remove skin or tissue

• Produce a surgical facelift

• Permanently eliminate wrinkles

• Guarantee double-chin removal

• Permanently shrink pores

• Strengthen facial muscles

• Produce identical results in every client

Individual outcomes depend on age, skin condition, tissue thickness, treatment parameters and biological response.

Professional Facial Applications

The cartridge must be selected according to anatomy, tissue thickness and professional training. A deeper cartridge is not automatically more effective.

Large 19-Inch Treatment Display

The system includes a 19-inch HD display designed to provide convenient access to:

• Treatment-area diagrams

• Parameter selection

• Cartridge information

• Treatment settings

• Operating status

• Protocol guidance

The display may support facial mapping through diagrams or software guidance.

It should not be described as providing real-time visualization of nerves, vessels or tissue layers unless the machine includes a separate diagnostic-ultrasound imaging system.

Facial mapping software does not replace anatomical knowledge or professional treatment planning.

Professional Treatment Planning

Full-Face Firming

Use the appropriate cartridge depths to develop a structured protocol for suitable forehead, cheek and lower-face areas.

Jawline and Lower-Face Contouring

The 3.0 mm and 4.5 mm cartridges may support professionally planned treatment of appropriate lower-face areas.

Submental-Area Treatment

The 4.5 mm cartridge may be used on suitable tissue beneath the chin after confirming adequate tissue depth and excluding prohibited structures.

It should not be described as guaranteed double-chin removal.

Neck Treatments

Selected neck areas may be treated by a trained operator. Energy must not be delivered over the thyroid, trachea, major blood vessels or other prohibited structures.

Fine-Line and Texture Protocols

The shallower cartridge may support improvement in the appearance of suitable superficial concerns. It should not be represented as resurfacing the skin or removing wrinkles.

Claims That Should Not Be Guaranteed

The Portable HIFU Machine should not be advertised as providing:

• Guaranteed immediate lifting

• Surgical-facelift results

• Permanent wrinkle removal

• Nasolabial-fold elimination

• Guaranteed double-chin removal

• Permanent pore reduction

• Zero thermal-damage risk

• Pain-free treatment for every client

• Zero downtime

• Safety for every skin type or medical condition

• Guaranteed collagen regeneration

• Household or unsupervised home use

Focused ultrasound is professional aesthetic technology with real risks when used incorrectly.

Compact Floor-Standing Design

The system combines a large display with a relatively compact vertical housing.

Key design characteristics include:

• 19-inch HD display

• Metal chassis

• ABS exterior components

• Three interchangeable cartridges

• Professional floor-standing format

• Approximately 25 kg net weight

• 180 W rated power

• Compact dimensions for a professional treatment room

The machine should be positioned on a level surface with sufficient clearance and ventilation.

Although the system can be moved between treatment rooms, it should not be described as a handheld or consumer-portable device.

How a Professional Treatment Session Works

1. Client Consultation

The operator reviews the client’s concerns, medical history, previous aesthetic treatments, tissue condition and contraindications.

2. Treatment Mapping

Suitable treatment zones and prohibited anatomical areas are identified and marked.

3. Cartridge Selection

The 1.5 mm, 3.0 mm or 4.5 mm cartridge is selected according to the treatment area and tissue depth.

4. Skin Preparation

The treatment area is cleansed, and an appropriate ultrasound coupling gel is applied.

5. Parameter Selection

Energy, line spacing, treatment pattern and other available settings are selected according to the professional protocol.

6. Test Delivery

A test line or lower-energy application may be performed where required to evaluate client comfort and tissue response.

7. Controlled Treatment

The operator maintains full contact and actively controls the handpiece throughout the treatment.

8. Post-Treatment Care

The area is cleaned and suitable aftercare instructions are provided.

Temporary redness, swelling, tenderness, tingling, numbness or discomfort may occur.

Technical Specifications

The 50 Hz specification refers to the electrical power frequency. The ultrasound frequency must be listed separately if provided in the manufacturer’s technical documentation.

The introductory draft listed 21 kg, while the technical table listed 25 kg. This final version uses the more formal technical-table value of approximately 25 kg.

What Is Included?

Main Equipment

• One Portable HIFU control system

• One professional treatment handpiece

• Power cable suitable for the selected market

• Required handpiece connections

• Starter ultrasound coupling gel

Treatment Cartridges

• One 1.5 mm cartridge

• One 3.0 mm cartridge

• One 4.5 mm cartridge

Documentation and Training

• English user manual

• Installation and setup guidance

• Cartridge installation training

• Facial treatment guidance

• Treatment-area mapping guidance

• Safety and contraindication instructions

• Cleaning and maintenance guidance

• Basic troubleshooting assistance

• Training certificate after completion

Final cartridge quantities and package contents should be confirmed on the order quotation.

Professional Training and Support

Wikbeauty provides remote equipment training covering:

• Machine installation

• Display navigation

• Handpiece operation

• Cartridge installation

• Cartridge-depth selection

• Facial treatment mapping

• Prohibited anatomical zones

• Basic parameter selection

• Coupling-gel application

• Treatment monitoring

• Cleaning and maintenance

• Basic troubleshooting

A training certificate is provided after completion.

Equipment training does not replace anatomy education, professional aesthetic qualifications or licenses required in the operator’s jurisdiction.

Three-Year Professional Warranty

The Wikbeauty Portable HIFU Machine is supported by a three-year limited professional warranty.

Warranty Coverage

Subject to the official warranty terms, eligible manufacturing defects may be covered for:

• Main machine unit

• Internal electronic components

• Display and control system

• Original treatment handpiece

• Handpiece connectors

• Other eligible original machine components

Cartridges are limited-use components and may have separate warranty conditions.

Technical-Support Process

If a technical issue occurs, Wikbeauty will assist with:

1. Remote technical assessment

2. Guided diagnostic testing

3. Identification of the affected component

4. Confirmation of warranty eligibility

5. Replacement-part assistance where applicable

6. Remote installation guidance

Warranty Exclusions

The warranty does not normally cover:

• Accidental or cosmetic damage

• Incorrect operation or misuse

• Unauthorized repair or modification

• Incorrect voltage or electrical connection

• Damage caused by dropping the handpiece

• Normal cartridge depletion

• Incorrect cartridge installation

• Operation without sufficient coupling gel

• Unauthorized transportation damage

• Failure to follow the operating manual

All coverage remains subject to Wikbeauty’s official warranty policy.

Safety and Contraindications

The Portable HIFU Machine is professional aesthetic equipment and should only be operated by appropriately trained personnel.

Treatment may be contraindicated or require specialist assessment for clients with:

• Pregnancy or suspected pregnancy

• Active electronic implants

• Metal implants in or near the treatment area

• Active cancer

• Open wounds or active infection

• Severe skin disease in the treatment area

• Blood-clotting disorders

• Uncontrolled medical conditions

• Impaired sensation

• Recent surgery

• Recent injectable treatments

• Facial implants or lifting threads

• Other contraindications listed in the user manual

Prohibited Treatment Areas

Focused ultrasound must not be applied directly over:

• Eyes or eyelids

• Thyroid

• Trachea

• Major nerves

• Large blood vessels

• Bone surfaces

• Other areas prohibited by the device instructions

Incorrect depth, energy or placement can cause thermal or mechanical tissue injury.

This is not an exhaustive contraindication list. Medical clearance should be obtained whenever treatment suitability is uncertain.

Intended Professional Users

The Portable HIFU Machine is suitable for:

• Aesthetic clinics

• Medical spas

• Beauty salons

• Facial-rejuvenation studios

• Qualified independent practitioners

• Appropriately trained healthcare professionals

The system is not intended for casual, consumer or unsupervised home use.

Why Choose the Wikbeauty Portable HIFU Machine?

Three Essential Facial Depths

The 1.5 mm, 3.0 mm and 4.5 mm cartridges support superficial, mid-depth and deeper facial protocols.

Large Control Display

The 19-inch interface provides convenient access to treatment settings and facial-area guidance.

Compact Professional Format

Its vertical design and approximately 25 kg weight require less space than many larger HIFU platforms.

Universal Facial Applications

Develop professional protocols for suitable face, jawline, submental and neck areas.

Professional Training

Remote operating guidance and a training certificate are included.

Long-Term Equipment Support

The system includes a three-year limited professional warranty and remote technical assistance.

Frequently Asked Questions

What is the difference between the three cartridges?

The 1.5 mm cartridge supports superficial facial protocols, the 3.0 mm cartridge supports mid-depth treatments, and the 4.5 mm cartridge is intended for deeper applications on suitable facial and neck areas.

Can it remove a double chin?

The 4.5 mm cartridge may support contour refinement in an appropriately selected submental area. Guaranteed fat removal or complete double-chin elimination should not be claimed.

Can it treat nasolabial folds?

Treatment may improve surrounding skin firmness, but complete elimination of nasolabial folds should not be promised.

Can the system be used around the eyes?

Only appropriate areas around the eyes may be treated by a trained operator. Energy must never be applied directly over the eye or eyelid.

Are results immediate?

Some clients may notice an early change in firmness. Tissue-remodeling responses may develop progressively over time, and results vary.

Is treatment painless?

Client experience varies. Warmth, tingling, tenderness or temporary discomfort may occur.

Is there any downtime?

Some clients may continue normal activities shortly afterward, but temporary redness, swelling, tenderness, tingling or numbness may occur.

Can this machine be used at home?

No. It is professional HIFU equipment and should only be operated by an appropriately trained person.

What does 50 Hz mean?

It is the electrical input frequency, not the frequency of the ultrasound treatment energy.

Is training included?

Yes. Remote operating guidance and a training certificate are included.

What does the three-year warranty cover?

The limited warranty covers eligible manufacturing defects affecting approved machine components. Cartridge depletion, accidental damage, misuse and unauthorized modifications are excluded.

Add Professional HIFU Treatments to Your Service Menu

The Wikbeauty Portable HIFU Machine combines:

1. Three professional cartridge depths

2. A 19-inch treatment display

3. Facial-area mapping guidance

4. A compact floor-standing design

5. Professional training and technical support

Available for qualified professional use and subject to applicable local requirements.

Request Professional Pricing and Product Information

Professional 12D Focused Ultrasound System

Seven Cartridge Depths for Facial Firming and Body-Contouring Applications

The Wikbeauty HIFU 12D New Gold TT is a professional focused-ultrasound system with three treatment handles and seven interchangeable cartridge depths.

Four facial cartridges—1.5 mm, 2.0 mm, 3.0 mm and 4.5 mm—support professionally planned facial and neck treatments. Three deeper cartridges—6.0 mm, 9.0 mm and 13.0 mm—are intended for appropriately selected body areas.

Single and multi-line operating modes provide flexibility for targeted energy placement and broader treatment-area coverage.

Three treatment handles | Seven cartridge depths | 10,000 shots per cartridge | Three-year warranty

Separate Facial and Body Cartridge Systems

The seven cartridges must be divided clearly between facial and body applications.

Facial Cartridges

• 1.5 mm

• 2.0 mm

• 3.0 mm

• 4.5 mm

Body Cartridges

• 6.0 mm

• 9.0 mm

• 13.0 mm

The 6.0 mm, 9.0 mm and 13.0 mm cartridges should not be marketed for facial treatment. These depths are intended for body areas with sufficient tissue thickness.

A 13.0 mm cartridge must never be used on the face.

Four Facial Treatment Depths

1.5 mm — Superficial Facial Applications

The 1.5 mm cartridge operates at a supplied frequency of 5.5 MHz and is intended for suitable superficial facial areas.

Potential professional applications include:

• Superficial skin-firming protocols

• Fine-line appearance

• Skin-texture refinement

• Suitable areas of the forehead and cheeks